-
12th July 2017, 03:25 PM
#241
Legendary
If you can't get the aircon going here's an idea for you Rossco.
http://www.patrol4x4.com/forum/attac...read-image-jpg
-
The Following User Says Thank You to GQtdauto For This Useful Post:
-
12th July 2017 03:25 PM
# ADS
Circuit advertisement
-
12th July 2017, 07:54 PM
#242
Originally Posted by
Rossco
Starting to look a little bit more like a car slowly . . .
Sent from my GT-I9506 using Tapatalk
Bloody hell mate. Glad its you and not me doing that. I'd never finish it.
-
The Following 2 Users Say Thank You to mudski For This Useful Post:
GQtdauto (12th July 2017), Rossco (12th July 2017)
-
12th July 2017, 09:08 PM
#243
Legendary
Originally Posted by
mudski
Bloody hell mate. Glad its you and not me doing that. I'd never finish it.
Yeah she's getting there although really struggling with the rear barn doors for some reason, just can't get them to line up and work nicely. Not sure what I'm doing wrong or is going on will give a rest for a bit and persevere later. If worse comes to worse I'll take it in to me panel beater hopefully his magic touch should work. . .
Sent from my SM-T800 using Tapatalk
-
The Following 2 Users Say Thank You to Rossco For This Useful Post:
mudnut (12th July 2017), mudski (12th July 2017)
-
12th July 2017, 10:12 PM
#244
Legendary
Did you remove the hinges Rossco ?
I had one pin break on the right side so I removed the hinge got the broken pin out and replaced the pin , put it all back on and couldn't get it to line up or close properly .
I can't quite remember what it was but think I had the hinge wrong way when I put it back on .
-
-
12th July 2017, 10:29 PM
#245
Legendary
Originally Posted by
GQtdauto
Did you remove the hinges Rossco ?
I had one pin break on the right side so I removed the hinge got the broken pin out and replaced the pin , put it all back on and couldn't get it to line up or close properly .
I can't quite remember what it was but think I had the hinge wrong way when I put it back on .
Nah didn't take them off. Was way off, then took the doors of again & ground off all the old seam sealer and got it pretty close. Adjusted both mounts of the hinge both in the cab & in the door. Just can't seem to get both top & bottom latches working together nicely at all. Arrgh was starting to drive me crazy ! ! . . .
Sent from my GT-I9506 using Tapatalk
-
-
13th July 2017, 10:42 AM
#246
Breadmaker Shaker
Originally Posted by
Rossco
Nah didn't take them off. Was way off, then took the doors of again & ground off all the old seam sealer and got it pretty close. Adjusted both mounts of the hinge both in the cab & in the door. Just can't seem to get both top & bottom latches working together nicely at all. Arrgh was starting to drive me crazy ! ! . . .
Sent from my GT-I9506 using Tapatalk
Big door on right, little door on left, windows to the top Rossco.
Just in case!!
What is the charge? Eating a meal? A succulent Chinese meal??
-
The Following 9 Users Say Thank You to Plasnart For This Useful Post:
AB (13th July 2017), Avo (19th July 2017), Bacho86 (14th July 2017), Family4x4 (8th May 2020), GQtdauto (13th July 2017), Mc4by (13th July 2017), MudRunnerTD (13th July 2017), Rossco (13th July 2017), Winnie (13th July 2017)
-
13th July 2017, 11:02 AM
#247
Patrol Freak
Made me chuckle
Originally Posted by
Pla
snart;733490
Big door on right, little door on left, windows to the top Rossco.
Just in case!!
-
The Following User Says Thank You to Mc4by For This Useful Post:
-
13th July 2017, 12:44 PM
#248
Legendary
Yep , now that's funny , not much help but frickin funny .
-
-
13th July 2017, 02:10 PM
#249
Legendary
Originally Posted by
Plasnart
Big door on right, little door on left, windows to the top Rossco.
Just in case!!
Cheers Plassy wish it was that simple, stupid things. . . Have given up on them for now, thinking i might just tek screw some eyelets to the back of the cab and use a big ratchet strap to hold them shut
Sent from my SM-T800 using Tapatalk
-
The Following 4 Users Say Thank You to Rossco For This Useful Post:
4bye4 (13th July 2017), GQtdauto (13th July 2017), Hilux man (15th July 2017), Plasnart (13th July 2017)
-
13th July 2017, 06:14 PM
#250
Expert
Have u checked the diagonal dimensions to make sure it's square?
-