-
31st October 2018, 03:09 PM
#1061
Legendary
Flywheel either rattle gun or breaker bar. Just need to wedge a screwdriver or prybar into one of the flywheel teeth and lock it against a dowel i think from memory. Kindof a fun job when you've only got two hands lol. . .
Sent from my SM-G930F using Tapatalk
-
The Following User Says Thank You to Rossco For This Useful Post:
Winnie (31st October 2018)
-
31st October 2018 03:09 PM
# ADS
Circuit advertisement
-
31st October 2018, 03:14 PM
#1062
Administrator
Lol yep I forgot about that yeah that spot is correct for feed, sorry bro!
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to AB For This Useful Post:
Winnie (31st October 2018)
-
31st October 2018, 03:19 PM
#1063
The 747
Originally Posted by
Rossco
Flywheel either rattle gun or breaker bar. Just need to wedge a screwdriver or prybar into one of the flywheel teeth and lock it against a dowel i think from memory. Kindof a fun job when you've only got two hands lol. . .
Sent from my SM-G930F using Tapatalk
Yeah problem there is because the engine is just sitting on a tyre it wants to turn onto its side. Would probably help if I could get somebody to hold onto it.
Sent from my SM-G960F using Tapatalk
-
-
31st October 2018, 05:41 PM
#1064
Daily Lurker
Originally Posted by
Winnie
Cheers Nicco! Hey with the sticker you print can you only do vinyl or can you use other materials?
Sent from my SM-G960F using Tapatalk
not sure, what do you want to cut and ill let you know if i can cut it lol
-
-
31st October 2018, 05:43 PM
#1065
Daily Lurker
Originally Posted by
Winnie
I think the only option is going to be an effing big rattle gun. Mine won't budge them and with a big breaker bar it just want to rotate the engine onto its side because it is not secured.
Sent from my SM-G960F using Tapatalk
i have a rattle gun that supposedly can produce 2000NM of torque, your welcome to borrow it mate?
-
-
31st October 2018, 06:27 PM
#1066
The 747
Originally Posted by
rusty_nail
not sure, what do you want to cut and ill let you know if i can cut it lol
Something to withstand engine bay temps. I wanna get a new sticker printed for the rocker cover like this one.
Originally Posted by
rusty_nail
i have a rattle gun that supposedly can produce 2000NM of torque, your welcome to borrow it mate?
Holy shit lol, mine is apparently good for 380nm but it won't come close
Sent from my SM-G960F using Tapatalk
-
-
31st October 2018, 07:13 PM
#1067
Daily Lurker
Originally Posted by
Winnie
Something to withstand engine bay temps. I wanna get a new sticker printed for the rocker cover like this one.
Holy shit lol, mine is apparently good for 380nm but it won't come close
Sent from my SM-G960F using Tapatalk
ill ask at the local supplier if they do high temp stuff. may be better cutting the reverse logo(as in the borders of the letters) then you spray painting high temp paint onto it?
i can send down the rattle gun if you like?
actually ask AB if hell pick it up on the way to sprocks bucks, are you going to that? if you can sort it out you can borrow it then, then return it when it works?
-
-
31st October 2018, 07:50 PM
#1068
The 747
Thanks mate for the offer, MB has one as well and is already travelling through so we will give his a go!
Sent from my SM-G960F using Tapatalk
-
-
31st October 2018, 08:25 PM
#1069
Moderator
I have something that might get it done tio winnie, ill bring it down mate.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following 2 Users Say Thank You to MudRunnerTD For This Useful Post:
MB (31st October 2018), Winnie (31st October 2018)
-
31st October 2018, 08:34 PM
#1070
The 747
Cheers Daz!
This is where I am at now. Not a lot more to go.
I need to grind the crank hole out on my sandwich plate to fit the larger crank of the turbo motor.
Need to install fuel pump and the lines and injectors.
Flywheel and clutch
Vac pump when it shows up.
I need a couple of adaptors for turbo oil feed and a new drain hose.
Will need to get an oil feed hose made for the vac pump
I am going to relocate the vac canister to the drivers side.
5mm spacer to be made for the tacho sensor
Sent from my SM-G960F using Tapatalk
-
The Following 3 Users Say Thank You to Winnie For This Useful Post:
AB (31st October 2018), Avo (1st November 2018), MB (31st October 2018)