-
3rd September 2016, 10:56 PM
#11
Expert
Nope, not a Thomas.
I have fitted a few PTO winches over my lifetime, the main issue is where on the winch the shaft come out.
The uni joint for the shaft needs a bit of room and the angle on them can be fairly steep so long as you only use it in a low gear.
Where is the output shaft and how much room around it?
-
-
3rd September 2016 10:56 PM
# ADS
Circuit advertisement
-
4th September 2016, 10:06 AM
#12
Originally Posted by
the godfather
Nope, not a Thomas.
I have fitted a few PTO winches over my lifetime, the main issue is where on the winch the shaft come out.
The uni joint for the shaft needs a bit of room and the angle on them can be fairly steep so long as you only use it in a low gear.
Where is the output shaft and how much room around it?
I'll take a few pics of the shaft for you. I'll probably sell the winch and bullbar together. Any idea what they would be worth?
-
-
4th September 2016, 10:41 AM
#13
Had a look. Looks like there is no angle on the uni joint. Goes straight into the winch.
-