-
11th May 2016, 10:35 AM
#811
Patrol God
I've called it i won't be doing it. I got no means , time or premises to do it so to workshop it goes.
Sent from my SM-G920I using Tapatalk
-
-
11th May 2016 10:35 AM
# ADS
Circuit advertisement
-
11th May 2016, 11:00 AM
#812
The 747
I chickened out of cutting mine too, only cost a slab of crownies to the panelbeater. He said don't use a grinder, and used an air hacksaw.
-
The Following 2 Users Say Thank You to Winnie For This Useful Post:
BigRAWesty (11th May 2016), Rocket55 (11th May 2016)
-
11th May 2016, 11:23 AM
#813
Patrol God
Originally Posted by
Winnie
I chickened out of cutting mine too, only cost a slab of crownies to the panelbeater. He said don't use a grinder, and used an air hacksaw.
Less sparks, less finish work.
Either a hacksaw or piston nibblers (drill powered ones) work well and leave a nice clean edge..
Just make sure you use em on a clean flat surface.. the shavings are half moon shaped spikes from hell!!!!
-
-
11th May 2016, 12:33 PM
#814
Patrol Guru
I took mine to a panel beaters and they cut the hole, welded a piece into the bonnet, painted the bonnet and scoop and fixed some holes and resprayed my left hand guard for $900 cash
2004 4.2TDi GU ST Ute, 3" Exhaust, UHF, Lightforce Spotties, BFG All Terrains, Steel Winchbar, Winch, Dual Batts, CC Ultimate IC, 4" Snorkel, XLR8 Steps and Scrub bar
-
The Following User Says Thank You to gubigfish For This Useful Post:
-
11th May 2016, 07:06 PM
#815
Patrol Guru
I used an air hacksaw for mine, worked a treat .... Twice.
Cheers Rod
_______________________________________________
Bitumen ...... Another watse of public funds
My Build 2005 TD42TI
-
The Following 2 Users Say Thank You to Rocket55 For This Useful Post:
BigRAWesty (11th May 2016), Hodge (11th May 2016)
-
11th May 2016, 08:11 PM
#816
Patrol God
@mudski @Rocket55
How are your fans for the inter cooler wired up? There is not a single bit of info or instructions on how it's meant to be setup.
There is a blue wire in the loom I believe, so is it intended to be constant on with IGN ?
For some reason I believed/though the fan was thermally kicked in. My bad.
-
-
11th May 2016, 08:18 PM
#817
Patrol God
-
-
11th May 2016, 08:18 PM
#818
There's ignition power in the wiper motor. Thats the easiest spot to get power.
The blue wire would go here.
Sent from my SM-P600 using Tapatalk
-
-
11th May 2016, 08:22 PM
#819
Patrol God
Originally Posted by
mudski
There's ignition power in the wiper motor. Thats the easiest spot to get power.
The blue wire would go here.
Sent from my SM-P600 using Tapatalk
Yeah that's where I already got ign from for my Redarc. So I'm guessing it is meant to be like that always on when ign on ?
-
-
11th May 2016, 08:23 PM
#820
Patrol God
Originally Posted by
nissannewby
Dont fit it....
Not a fan of a fan Mat ?
-