Jay see 1997 GU build up

[mudski]

sounds more water friendly as well, a good upgrade imo
What brand winch do you run??

Mines very water friendly. It never sees it. Apart from rain water. Lol.
Mine is an old TJM Ox.

Sent from my GT-N7105T using Tapatalk

[jay see]

There's some things I can do, some things I can't and then there's the ones if I fark up it's going to cost me time and money. I know my limits.

The light bulb came on re: the solenoid and I think the problem was, I was looking at Ben's pic wanting to wire it up to my handheld controller, not a separate switch as in that pic... I think.. Anyway sorted now.

The patrols in getting some goodies fitted and I got them to wire it up. Saves me blowing up a perfectly good solenoid or anything else for that matter.

Ok.

Looks like my hand held was the problem all along.

Now that I now that my controller is no good and don't like the chances of finding one I need to run a in cab switch. I also want to have a push button near the winch on the bullbar to spool in/out while not in the car. If i'm going to do this, it might as well be pobably. Will move the solenoid to the engine bay.

I think I have gotten my head around Bens pic, That said I still have a few questions.

This the switch I'm going to use inside

http://www.ebay.com.au/itm/231996221...%3AMEBIDX%3AIT

This one on the bar

http://www.ebay.com.au/itm/132005868...%3AMEBIDX%3AIT

I've done a litte drawing of how i think it all goes, just not sure on 8 & 7.

[lucus30]

You'll get a hand controller cheap on eBay if you want

Sent from my E6653 using Tapatalk

[jay see]

You'll get a hand controller cheap on eBay if you want

Sent from my E6653 using Tapatalk

Dosen't it need to match the winch?

I had a quick look the other day and didn't find one for a T max, besides the solenoid still needs to be wired up.

[lucus30]

Dosen't it need to match the winch?

I had a quick look the other day and didn't find one for a T max, besides the solenoid still needs to be wired up.

Your using a different solenoid so why would controller matter ?



Sent from my E6653 using Tapatalk

[Kimbo63]

Jay see think of it this way the switch you want to put in the cab is the same switch on the controller

[jay see]

Your using a different solenoid so why would controller matter ?



Sent from my E6653 using Tapatalk

IDk.

I'm ditching the whole hand held controller now.

[jay see]

Winch switch is worked out. Helps when you have a switch that works.
Now for another question. I going to run an isolator switch as well do I need to run either one through a relay?

[Ryanbaxwar]

its nice to see that color blue! if got the same but its a 98.. dont see to many of them anymore

[jay see]

its nice to see that color blue! if got the same but its a 98.. dont see to many of them anymore

Will look even better when I do the windows.

Yeah not many around.