-
12th October 2019, 06:41 PM
#9201
Patrol God
A lot of automotive alternators need an initial 1500 rpm or there about to start charging properly.
-
The Following 2 Users Say Thank You to mudnut For This Useful Post:
jay see (12th October 2019), MB (13th October 2019)
-
12th October 2019 06:41 PM
# ADS
Circuit advertisement
-
13th October 2019, 10:45 AM
#9202
Legendary
Door replacement today.
Any tips. Never had to remove doors or guards before. Best to leave hinges on the car and swap doors or unbolt hinges from body?
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
13th October 2019, 01:39 PM
#9203
Replaced my drivers door hinge 2 weeks ago. Had to remove the guard which was easy enough but the rest a bit of a PITA. best done with a mate or helper. if just doing the doors the door hinge is easy to get to and the jobs a breeze.
Pete
-
The Following 2 Users Say Thank You to Pete49 For This Useful Post:
jay see (13th October 2019), MB (13th October 2019)
-
13th October 2019, 01:49 PM
#9204
.........
Seem to remember @GQTD42 Rob mate kindly posting up a neat trick using a large step ladder and ratchet straps holding his door up for him on his lonesome.
Sent from my iPhone using Tapatalk
-
-
13th October 2019, 02:17 PM
#9205
Legendary
Job done.
Only needed a extra pair of hands to plug it up to get the window down.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following 2 Users Say Thank You to jay see For This Useful Post:
MB (13th October 2019), mudnut (13th October 2019)
-
13th October 2019, 02:51 PM
#9206
Legendary
Next is to sort out the suspension.
Currently it's got 2" flexi coils with 4" stocks. As per pics. Happy with these as it sits legal and has great flex.
Now I can't find anyone that does a flexi in 2". Found 3" flexi, but then I'll need to change to suit a 3" lift. Will it need drop boxes and adjustable panards what else?
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
13th October 2019, 04:04 PM
#9207
The 747
Why are you looking for new springs if you are happy with yours?
Sent from my SM-G960F using Tapatalk
-
-
13th October 2019, 04:53 PM
#9208
.........
-
The Following User Says Thank You to MB For This Useful Post:
Plasnart (13th October 2019)
-
13th October 2019, 06:05 PM
#9209
Legendary
Originally Posted by
Winnie
Why are you looking for new springs if you are happy with yours?
Sent from my SM-G960F using Tapatalk
Pretty sure that the front left hand has collapsed.. I've got about 30-40mm difference which is why I've got this horrible lean.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
13th October 2019, 07:50 PM
#9210
Patrol God
Finished greasing up slide pins just before as kindly suggested by @mudski .
1 in 5 brake pedal presses creates a clunk up front.
Fingers crossed this resolves it .
-
The Following User Says Thank You to Hodge For This Useful Post: