Build time

**JackCollo** · 8th March 2018, 09:18 PM

Well mark I’d be stupid not to take up that offer but don’t worry there will be a bottle of jack in it for you

Sent from my iPhone using Tapatalk

**NissanPatrol.com.au** · 8th March 2018 09:18 PM

**Ben-e-boy** · 8th March 2018, 09:28 PM

Originally Posted by JackCollo

Yeah I’m looking for a lot of low down grunt.

Sent from my iPhone using Tapatalk

Something you wont even remotely come close too with an off the shelf 3076

**MudRunnerTD** · 8th March 2018, 10:09 PM

Originally Posted by Rossco

Hey mate i would seriously coincider Borg Warner for turbo, EFR 6758 is a good size. If your after power and want to future proof it in case you want to tweak it up further down the track i would go for 12mm pump.

Not sure about high flow injectors think it's more of a wankey catch phrase, more depends I the pressure they are set to crack at which should be done with a tune. Not sure on high flow water pump either mine has a standard one and seems fine.

Personally prefer front mount intercooler and are a huge amount cheaper that a CC one too. High flow oil pump wouldn't have a clue in that one but would assume standard would be fine depending on how crazy yoy want to go I guess. Also need to think about what you want it for too really, how much power you really need versus reliability / drivrability etc. . .

Sent from my SM-G930F using Tapatalk

I have this Borg Warner on my GUIV running 28psi all day. So impressed with the output and torque curve and know it's not even working hard in my car.

Um just about to fit a 12mm UFI pump and front mount cooler and 4" snorkel. Can't wait t o unlock this thing.

**JackCollo** · 9th March 2018, 11:17 PM

Yeah it sounds like what I’m looking for in the truck.

Oh please let me know how that goes I’d be really interested in knowing.

Sent from my iPhone using Tapatalk

**JackCollo** · 9th March 2018, 11:20 PM

Also does anyone know the main front pulley nut size for the gq td42 i can’t figure out. And it’s driving me nuts

Sent from my iPhone using Tapatalk

**Ben-e-boy** · 10th March 2018, 08:10 AM

41mm for silver top, 55mm for the rest

**JackCollo** · 10th March 2018, 10:44 AM

Originally Posted by Ben-e-boy

41mm for silver top, 55mm for the rest

Champion thanks beneboy
Any other recommendations for what I should do the motor while rebuilding? Heard good things about multi angle valve grinds

Sent from my iPhone using Tapatalk

**Ben-e-boy** · 10th March 2018, 06:44 PM

Originally Posted by JackCollo

Champion thanks beneboy
Any other recommendations for what I should do the motor while rebuilding? Heard good things about multi angle valve grinds

Sent from my iPhone using Tapatalk

Everything I have been prepared to discuss is in your other thread. I'd reread it.

**JackCollo** · 10th March 2018, 08:03 PM

All good thanks Ben-e-boy

I’ll use the info from that but make this the new thread for people to follow for my build

Sent from my iPhone using Tapatalk

**JackCollo** · 11th March 2018, 04:46 PM

Anyone got any helpful hints removing the main pulley nut

Sent from my iPhone using Tapatalk

User Tag List

Thread: Build time

Thread Tools

Display

The Following 2 Users Say Thank You to MudRunnerTD For This Useful Post:

The Following 2 Users Say Thank You to Ben-e-boy For This Useful Post:

The Following User Says Thank You to Ben-e-boy For This Useful Post:

Posting Permissions