-
24th January 2019, 06:26 PM
#11
Beginner
Thanks mate. Is the hole already threaded too?
Sent from my iPhone using Tapatalk
-
-
24th January 2019 06:26 PM
# ADS
Circuit advertisement
-
24th January 2019, 08:53 PM
#12
Daily Lurker
Originally Posted by
Wackyrider
Thanks mate. Is the hole already threaded too?
Sent from my iPhone using Tapatalk
Not threaded, had to feed the bolt with the very large washer it came with through a hole that was near my mount hole and push it over to the hole I used so it dropped through. Make sense?
Sent from my SM-G930F using Tapatalk
-
-
24th January 2019, 09:20 PM
#13
Beginner
Yeah it does. Just trying to see where the other bike that you out the bolt and washer in from is.
Sent from my iPhone using Tapatalk
-
-
25th January 2019, 11:35 AM
#14
My Outback drawers came with a restraint point bolted to a capture nut on the top/front of the left drawers. I took it out (no small kids ride here) and have no idea where I put it. Maybe take a look later.
GU IV 2006; 3.0 DDi ST-S; Nissan Snorkel, Bull Bar and Tow Bar; Warn 8,000# Winch with Dyneema rope; Auber EGT, Boost and dual Battery gauges; Provent 200; Dual Batteries; Three Dogs recovery points; Rear Springs +20% load; Outback drawers and Cargo Barrier; UHF; [GPS, Radio, CD, Bluetooth, SD, USB] floor extension; Alloy roof rack
"Smart people know what they don't know"
-
The Following User Says Thank You to Dr Gary For This Useful Post:
rusty_nail (25th January 2019)
-
25th January 2019, 02:51 PM
#15
Daily Lurker
Originally Posted by
Wackyrider
Yeah it does. Just trying to see where the other bike that you out the bolt and washer in from is.
Sent from my iPhone using Tapatalk
Sorry mate, don't quite understand that, what is it you need? I'll try get some pics for you or explain better
Sent from my SM-G930F using Tapatalk
-
-
25th January 2019, 02:53 PM
#16
Daily Lurker
Originally Posted by
Dr Gary
My Outback drawers came with a restraint point bolted to a capture nut on the top/front of the left drawers. I took it out (no small kids ride here) and have no idea where I put it. Maybe take a look later.
Into the carpeted MDF? Surely that isn't too secure? I have the outback drawers and have had to modify mine to accommodate my 65l anyways
Sent from my SM-G930F using Tapatalk
-
-
25th January 2019, 02:53 PM
#17
Beginner
Jesus. I wouldn’t understand that either. Autocorrect seems to have done a number on that for me.
Just wanted to know where the other hole was. The one that you put the bolt and washer through.
Sent from my iPhone using Tapatalk
-
-
25th January 2019, 03:24 PM
#18
Daily Lurker
-