-
22nd June 2017, 11:34 AM
#1
-
-
22nd June 2017 11:34 AM
# ADS
Circuit advertisement
-
22nd June 2017, 04:31 PM
#2
Rotaredom
Bump as thread went into moderation
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
22nd June 2017, 05:13 PM
#3
Patrol God
Will a plate for an RB30 suit your needs?
My advice is: not to follow my advice.
-
-
22nd June 2017, 11:28 PM
#4
Legendary
Originally Posted by
the frenchy
Hi folks ! I need your help please
I search an sandwich oil plate for my engine but an engineer of nissan have think it was a pretty good idea to put a filter system with a 1-12unf threads
... it's the same size for trucks, agricole and industrial engine
So, of course, I can't find any plate that fit on this size of treads... after several research on google who make me crazy
the only resulat that I found is a relocation kit for Dodge Cummins with 1" inch thread but in 16 unf
So I came here on this side of the earth try to find the graal of our engine
I've you got an idea or something to can help me ?
thank you !
12 UNF translates into 12 threads per inch & 2.1mm thread pitch.
I'm not sure about that though.
Nissan usually follows standard common thread sizes. 2.1mm thread pitch for an oil filter looks bit too high.
This is the one I used for RB30. I believe RB30 & RD28 blocks are quite similar if not the same.
http://www.ebay.com.au/itm/BLUE-UNIV...wAAOSwsW9YzRPs
-
-
23rd June 2017, 12:32 AM
#5
Originally Posted by
dom14
12 UNF translates into 12 threads per inch & 2.1mm thread pitch.
I'm not sure about that though.
Nissan usually follows standard common thread sizes. 2.1mm thread pitch for an oil filter looks bit too high.
This is the one I used for RB30. I believe RB30 & RD28 blocks are quite similar if not the same.
http://www.ebay.com.au/itm/BLUE-UNIV...wAAOSwsW9YzRPs
this is what I found when I do a research on the most popular car parts website in my country :
-
-
23rd June 2017, 12:35 AM
#6
Originally Posted by
NissanGQ4.2
Bump as thread went into moderation
sorry I don't understand :/
-
-
23rd June 2017, 12:49 AM
#7
Legendary
Originally Posted by
the frenchy
sorry I don't understand :/
I think he was saying the thread initially automatically went into moderation before being posted on the public forum.
Perhaps because you are a newbie or you're posting from overseas.
Not to worry. the thread is active now.
-
-
23rd June 2017, 12:52 AM
#8
Originally Posted by
dom14
I think he was saying the thread initially automatically went into moderation before being posted on the public forum.
Perhaps because you are a newbie or you're posting from overseas.
Not to worry. the thread is active now.
ah ok !
Yes when a post this thread, I've been notified I should wait the moderation approbation before the validation and publication... probably beause I'm a new member. I'm ok with that
-
-
23rd June 2017, 01:05 AM
#9
Legendary
Originally Posted by
the frenchy
this is what I found when I do a research on the most popular car parts website in my country :
Yes, you're right.
It appears 12UNF sandwich plates is not out there.
You might be able to find a 12UNF to 16UNF adapter or a 12UNF center bolt to use
with the same sandwich plate.
http://www.ebay.com.au/itm/12AN-AN12...38.m2548.l4275
Check this out.
http://www.nissanpatrol.com.au/forum...il-Cooler-Help
If you type "RD28 oil filter thread size" into google. You may get some literature to point you in the right direction.
-
-
23rd June 2017, 04:53 AM
#10
I've send a mail to BPS racing : expert dealer of rallye and racing sport cars parts in france, and they told me this thread type for oil systeme is so rare than nobody developped a systeme for this size... So I have no choice, I could do build a hand made system...
Anybody have earlier do something like this ?
-