-
3rd December 2020, 12:00 AM
#51
Patrol God
-
The Following 2 Users Say Thank You to mudnut For This Useful Post:
Bidja (3rd December 2020), MB (3rd December 2020)
-
3rd December 2020 12:00 AM
# ADS
Circuit advertisement
-
3rd December 2020, 05:48 AM
#52
.........
-
The Following 2 Users Say Thank You to MB For This Useful Post:
Bidja (3rd December 2020), Winnie (3rd December 2020)
-
3rd December 2020, 09:08 AM
#53
Patrol Freak
Originally Posted by
mudnut
That was a good display and noted that his lockers were the Terrain Tamer that use the new 4 pin design Harrop Eaton ELocker. Been checking these out and they no longer use the cam ramp disc plate with the ball bearings to provide disc plate separation to move the pins to lockup assy. Harrop now use 4 pins in lieu of the ball bearing and at disc plate rotation/engement,the pins force a lug profiled lock plate to engage with the housing. Harrop claim a more positive lock engagement and axle rotational lag of max 1/8 turn in lieu of 1/2 turn experienced with earlier design.
For Info: Posted Harrop Eaton ELocker video of current build/operation
https://www.youtube.com/watch?v=nT_H6rpd-Ck
Last edited by Bidja; 3rd December 2020 at 09:20 AM.
2008 GU WAG ST Manual CRD - To do the job
-
The Following 2 Users Say Thank You to Bidja For This Useful Post:
MB (3rd December 2020), mudnut (3rd December 2020)
-
3rd December 2020, 10:06 AM
#54
.........
-
-
3rd December 2020, 10:24 AM
#55
-
-
3rd December 2020, 11:35 AM
#56
.........
-
The Following 2 Users Say Thank You to MB For This Useful Post:
10G (8th February 2021), Winnie (3rd December 2020)
-
3rd December 2020, 11:43 AM
#57
The 747
Loving the photo journey, never seen how these are installed before.
Sent from my SM-G986B using Tapatalk
-
The Following User Says Thank You to Winnie For This Useful Post:
-
3rd December 2020, 12:30 PM
#58
.........
-
The Following 2 Users Say Thank You to MB For This Useful Post:
10G (8th February 2021), PeeBee (3rd December 2020)
-
3rd December 2020, 01:20 PM
#59
Patrol Freak
@MB Noticed U wiped off the hands for assy_looking good mate
After 30 yrs of hard yakka, how do teeth look (crown/pinion wear mark / shine) and out of interest did U check backlash with indicator_ nom 0.010"??? is the go not sure there..
2008 GU WAG ST Manual CRD - To do the job
-
The Following User Says Thank You to Bidja For This Useful Post:
-
3rd December 2020, 04:11 PM
#60
-
The Following 2 Users Say Thank You to MB For This Useful Post:
Bidja (3rd December 2020), Plasnart (3rd December 2020)