Rosscos GQ Rejuvenation

[AB]

Oh man champion daz, was thinking of calling tomozz but don't have to anymore.

Yeah definatly reckon that looks right now. . . Can't wait to get them in there soon, will have to chop a hole for snorkel too . . .

Sent from my SM-T800 using Tapatalk

Nibbler time?


Sent from my iPhone using Tapatalk

[Rossco]

Nibbler time?


Sent from my iPhone using Tapatalk

Yeah sounds like fun, chop chop

Sent from my SM-T800 using Tapatalk

[MudRunnerTD]

Arn't you using you old guards? Don't you have a snorkel now?

[Rossco]

Arn't you using you old guards? Don't you have a snorkel now?

Yeah using old guards, have a snorkel but will be going from 3" to 4". Also snorkel sneaks through between battery & firewall, going to stay with this, just have to nut out airbox optins when it comes to it. . .

Sent from my SM-T800 using Tapatalk

[MB]

Weld into the 'V' for sure Rossco:-)


Sent from my iPhone using Tapatalk

[Winnie]

That's an awesome brace Rossco. Nice find man!

Sent from my SM-G935F using Tapatalk

[MB]

Rossco mate, just a thought it might be best to only weld 1" , then space, then 1" for flex stress. Consult an engineer or maybe some info or more knowledgeable blokes on here could add to this theory mate!

[Rossco]

Made some more good progress in the shed. Quarter chop finished, bogged, sanded & primed, put some seam sealer on the inside too & painted. Fixed a couple of tiny dings the rest is pretty perfect.

Trimmed the rear guards a little. Was easier than i thought really, I've usually just bashed them back a little hack style, but did it a bit more properly this time.

Marked out new fold line, bent out old tab, flattened with some vice grips then marked cut line, cut, bent new crease slowly slowly then kinda bashed it square - came up pretty good. Just did the rear of the guards, looks like there's 15-20ml to be made at the front from trimming the plastic trim thingy so will just do that.









Pulled the windscreen out, found there was a big home for ants in the seal so had to get out the old mortein. . Sorry ants but glad their gone. 😕





Got the brace kits installed too, look great. ☺





Sent from my GT-I9506 using Tapatalk

[Rossco]

Rossco mate, just a thought it might be best to only weld 1" , then space, then 1" for flex stress. Consult an engineer or maybe some info or more knowledgeable blokes on here could add to this theory mate!

Hey markie forgot too add panel beater came round the other night to look @ it, reckoned weld whole seem would be the go. Told us to rub the whole thing back with 800 wet & dry and use scotch brite in the pokey bits to make it dull before paint. Should be ready for panting in a few days I reckon, hopefully they can sqeeze it in soon.

Also droped into roadrunner and picked up some new door rubbers, bailey channel and one of their diff / gearbox breather kits. . .

Wallets Lovn this although hasn't been to bad so far. . .



Sent from my GT-I9506 using Tapatalk

[Winnie]

Hey markie forgot too add panel beater came round the other night to look @ it, reckoned weld whole seem would be the go. Told us to rub the whole thing back with 800 wet & dry and use scotch brite in the pokey bits to make it dull before paint. Should be ready for panting in a few days I reckon, hopefully they can sqeeze it in soon.

Also droped into roadrunner and picked up some new door rubbers, bailey channel and one of their diff / gearbox breather kits. . .

Wallets Lovn this although hasn't been to bad so far. . .



Sent from my GT-I9506 using Tapatalk

If your wallet is loving it now wait until you get the bill from the panel beater! Haha. Coming along really nicely mate.

Sent from my SM-G935F using Tapatalk