AB's new GQ is finally here

[MB]

AB's now two steps closer with @rusty_nails help today!
Positive outcome, 6 sets of chopsticks were salvaged from the old donk, time to clock off, grubs up :-)



Sent from my iPhone using Tapatalk

[AB]

Yep good day, most things now done but down to the custom stuff now which will take a bit of time but almost there!

[mudski]

Yep good day, most things now done but down to the custom stuff now which will take a bit of time but almost there!

Look at that sexy black top its wearing. Silver is so, yesterday.

[rusty_nail]

Good stuff mate!!

Sent from my BV6000 using Tapatalk

[AB]

Went to pirtek today and got my existing water and oil feed lines modified to suit new block.

Longer oil feed for alternator too.

Turbo is now complete!

Much better to finally feed oil to turbo on the same side of block now!

[AB]

............

[Winnie]

What's next Andy?

[AB]

What's next Andy?

Getting close mate...

Replace spigot bush
Blanking plate on vac pump
Fuel pump install
Backing plate, clutch, flywheel...clutch and flywheel is done ready to be picked up.
Fan, belts, etc
Tacho sensor
Waiting for new bracket for power steering
Oil and coolant and filters.
Need idler pulley
Engine in, connect everything up...

Probably missed something but that's what comes to mind so far?

[jay see]

Engine in, connect everything up...

Probably missed something but that's what comes to mind so far?

You forgot one.

Wipe smile off face after first start up/drive.😂.

Good luck with it all.

[AB]

Special thanks to Bennyboy!!!

He's loaning me a vac pump so I can get going until I can find a second hand one.

They are ridiculous $$$ to buy brand new so at least I can get going until I find one.