-
18th September 2018, 08:44 PM
#31
-
The Following 2 Users Say Thank You to Reddave For This Useful Post:
MB (19th September 2018), Rossco (18th September 2018)
-
18th September 2018 08:44 PM
# ADS
Circuit advertisement
-
26th September 2018, 09:15 PM
#32
GU diff is in, 4.6s and lockers are in, heavy duty steering arms in, 315/75 16 Procomp muddies on, took it for a drive and then death wobbles
New panhard bushes and steering damper fixed it, just about ready for a shakedown run over the Vic long weekend
Just another Blue over Silver GQ with another TD conversion
-
The Following 2 Users Say Thank You to Reddave For This Useful Post:
MB (26th September 2018), MB TD42 (1st October 2018)
-
26th September 2018, 09:26 PM
#33
.........
Should climb tops Dave mate, awesome!
IMO tis a bad long Vic weekend for a run, boys in blue galore already ramping up!
Sent from my iPhone using Tapatalk
-
-
1st October 2018, 06:23 PM
#34
Expert Dingbat
4.6ers...5th gear all day... looking to install GU running gear on mine...did you go wider or just the diff center swap?
Quad-Drive 4WD Club...Western Australia
We're all here coz we ain't all there...
-
-
1st October 2018, 07:38 PM
#35
Took my two youngest sons away for a quick overnighter Saturday arvo, car was faultless, slowly dialing it in.
Originally Posted by
MB
Should climb tops Dave mate, awesome!
IMO tis a bad long Vic weekend for a run, boys in blue galore already ramping up!
Sent from my iPhone using Tapatalk
Had coppers come through Saturday night, just making there presence known, no hassles
Originally Posted by
MB TD42
4.6ers...5th gear all day... looking to install GU running gear on mine...did you go wider or just the diff center swap?
Replaced the whole GU diff assembly in the front, just replaced the rear centre, makes the car heaps better to drive, 4.6 and 35s are spot on to stock and as a bonus speedos now accurate!!
Just another Blue over Silver GQ with another TD conversion
-
The Following 3 Users Say Thank You to Reddave For This Useful Post:
AB (2nd October 2018), MB (2nd October 2018), MB TD42 (3rd October 2018)
-
6th October 2018, 07:03 PM
#36
Bought a jerry can holder off a Jayco and mounted it up to the little barn door, just saved myself $2500 by not having to put swingaways on!!
Just another Blue over Silver GQ with another TD conversion
-
-
7th October 2018, 08:22 PM
#37
Daily Lurker
Originally Posted by
Reddave
Bought a jerry can holder off a Jayco and mounted it up to the little barn door, just saved myself $2500 by not having to put swingaways on!!
Where do you put your number plate now mate? I had issues with finding a good spot for mine when I fitted my rear bar
Sent from my SM-G930F using Tapatalk
-
-
8th October 2018, 07:49 PM
#38
I will put it at the bottom, when I fit it up I’ll post a pic, next weekends job!
Just another Blue over Silver GQ with another TD conversion
-
The Following User Says Thank You to Reddave For This Useful Post:
rusty_nail (9th October 2018)
-
8th October 2018, 08:24 PM
#39
That tyre looks massive. Is it on a wheel carrier or off the rear door? I had trouble with door hinges on mine from brand spanking new, couldn't keep the door closed after corrugations, and they were factory baby 31x10R15!
-
-
8th October 2018, 08:31 PM
#40
Originally Posted by
PeeBee
That tyre looks massive. Is it on a wheel carrier or off the rear door? I had trouble with door hinges on mine from brand spanking new, couldn't keep the door closed after corrugations, and they were factory baby 31x10R15!
Yea, it’s huge, off the rear door for now, but looking at a more creative way to mount it
Just another Blue over Silver GQ with another TD conversion
-
The Following User Says Thank You to Reddave For This Useful Post:
PeeBee (8th October 2018)