-
5th October 2016, 06:44 PM
#1601
Administrator
Originally Posted by
JonnoD
I just read this mate. I would be devistated juat like you. Have you had a chat with the turbo supplier yet?
In discussions mate
-
The Following 4 Users Say Thank You to AB For This Useful Post:
BigRAWesty (5th October 2016), Rossco (5th October 2016), Stropp (5th October 2016), Woof (5th October 2016)
-
5th October 2016 06:44 PM
# ADS
Circuit advertisement
-
17th October 2016, 03:33 PM
#1602
Administrator
Picked up the engine today!!
-
The Following 18 Users Say Thank You to AB For This Useful Post:
Avo (17th October 2016), BigRAWesty (17th October 2016), gubigfish (17th October 2016), Hodge (17th October 2016), jay see (17th October 2016), Maxhead (17th October 2016), mudnut (17th October 2016), MudRunnerTD (17th October 2016), mudski (17th October 2016), NissanGQ4.2 (17th October 2016), Plasnart (17th October 2016), Rossco (17th October 2016), Sherro (17th October 2016), Stropp (17th October 2016), Touses (17th October 2016), TPC (17th October 2016), Winnie (17th October 2016), Woof (17th October 2016)
-
17th October 2016, 04:22 PM
#1603
Legendary
Ooh yeah baby. One major step forward ☺
-
-
17th October 2016, 07:18 PM
#1604
Patrol God
Originally Posted by
AB
Picked up the engine today!!
Originally Posted by
Rossco
Ooh yeah baby. One major step forward ☺
Tick on board??
-
The Following 2 Users Say Thank You to BigRAWesty For This Useful Post:
Avo (17th October 2016), mudnut (17th October 2016)
-
17th October 2016, 08:50 PM
#1605
Administrator
Going to be a bit of stuffing around to get this to work but all good.
It's a Ti engine so there's a little indentation where the tacho sensor goes so mine is no good.
I need to decide what to with the vac pump hole under the injector pump, I guess I can just make a plate up and block that hole.
Make up a new oil feed line for turbo
Old gaskets from my GQ are fun.
I need to get this new flywheel lightened 1.5-2kg and balanced with the clutch yet again.
Need another spigot bush
Oil drain.
Remove old gaskets from new engine.
Fix 3rd injector that we had issues with on my old engine.
New belts, gaskets, oil cooler kit, etc
New dipstick
Oil and filters
Check clutch alignment holes
-
The Following 4 Users Say Thank You to AB For This Useful Post:
growler2058 (17th October 2016), MudRunnerTD (17th October 2016), mudski (17th October 2016), Rossco (17th October 2016)
-
17th October 2016, 09:13 PM
#1606
Legendary
Why can't you use the original fly wheel off your motor, are they different? ?
-
-
17th October 2016, 09:19 PM
#1607
Administrator
Originally Posted by
Rossco
Why can't you use the original fly wheel off your motor, are they different? ?
Yeah different flywheel mate, larger crank, etc.
-
-
17th October 2016, 09:29 PM
#1608
Legendary
Ah yeah rodger that. Bit of a bugger spose it won't be ready to drop in on the weekend then . .
-
-
17th October 2016, 09:31 PM
#1609
If ya wanna hand with anything mate just yell out. Im close to finishing the house so maybe have some spare time soon.
Sent from my GT-N7105T using Tapatalk
-
The Following User Says Thank You to mudski For This Useful Post:
-
17th October 2016, 11:08 PM
#1610
Patrol God
Originally Posted by
AB
Going to be a bit of stuffing around to get this to work but all good.
It's a Ti engine so there's a little indentation where the tacho sensor goes so mine is no good.
I need to decide what to with the vac pump hole under the injector pump, I guess I can just make a plate up and block that hole.
Make up a new oil feed line for turbo
Old gaskets from my GQ are fun.
I need to get this new flywheel lightened 1.5-2kg and balanced with the clutch yet again.
Need another spigot bush
Oil drain.
Remove old gaskets from new engine.
Fix 3rd injector that we had issues with on my old engine.
New belts, gaskets, oil cooler kit, etc
New dipstick
Oil and filters
Get rid of the tic tic tic lol
Check clutch alignment holes
Just added a bit for you 😜
2003 gu3 td42tdi sold 😞 bloody gvm towing crap. Bt50 3500kg gvm.
-
The Following 3 Users Say Thank You to Stropp For This Useful Post:
Avo (17th October 2016), Clunk (17th October 2016), mudnut (18th October 2016)