Fund Raiser AB blew his engine

[Clunk]

The new donk doesn't have a dipstick??

It does but AB doesnt fit in that little hole

[Plasnart]

Are you coming?

Ho Ho Ho!! Comedian.

[Ben-e-boy]

Thanks Benny, appreciate it!!

This weekend is cleaning up the block and bolting things on so I'll have a look.

You don't happen to have a vac pump to suit the td42t by chance or a dipstick...lol

Let me start to put things on and see what crops up.

I printed out all torque specs but I didn't find one for the pulley on the water pump?

Water pump retaining bolts 16-21Nm

Water pump retaining nuts 30-41Nm

Thermostat housing bolts 16-21Nm

I might have a spare vac pump with some T motor stuff I bought of Mat. If I don't have it Mat does. I also have the one off my motor, which is spare now anyway

What wrong with the silvertop dipstick

[AB]

Water pump retaining bolts 16-21Nm Water pump retaining nuts 30-41Nm Thermostat housing bolts 16-21Nm I might have a spare vac pump with some T motor stuff I bought of Mat. If I don't have it Mat does. I also have the one off my motor, which is spare now anyway What wrong with the silvertop dipstick

Thanks mate, I mean the actual nuts that hold the pulley on.

The silver top is a lot shorter then this one but I can't even use my old holder because the min max line on the td42t is around 5mm difference either side of mine.

[Ben-e-boy]

Thanks mate, I mean the actual nuts that hold the pulley on.

The silver top is a lot shorter then this one but I can't even use my old holder because the min max line on the td42t is around 5mm difference either side of mine.

7-9 Nm for the nuts and fan bolts

[Patrol-Guy]

Thanks everyone and thanks Westy.

It's amazing how much extra things I now need as they crop up so again, very much appreciated but please, no more folks!

Hi everyone, I just got back from a trip to the Cape. That was awesome. But Sorry to hear about your engine problems AB. If you need more $$ then happy to contribute what I can.

Paul

[AB]

Hi everyone, I just got back from a trip to the Cape. That was awesome. But Sorry to hear about your engine problems AB. If you need more $$ then happy to contribute what I can. Paul

No stress mate, welcome back but thanks anyway!

[AB]

7-9 Nm for the nuts and fan bolts

Cheers Benny!!

[BigRAWesty]

Thanks everyone and thanks Westy.

It's amazing how much extra things I now need as they crop up so again, very much appreciated but please, no more folks!

Were all here to assist each other when and where we can, no matter the situation..

[Clunk]

Are you coming?

It's just the way he's sitting