Winnies 747 TD42 GQ

**threedogs** · 23rd September 2016, 04:03 PM

http://www.ebay.com.au/itm/222202277...%3AMEBIDX%3AIT

Ran across this and thought the way you 4.2 guys
chew out clutches you could buy a few in advance at these prices

**NissanPatrol.com.au** · 23rd September 2016 04:03 PM

**nissannewby** · 23rd September 2016, 08:20 PM

Originally Posted by MudRunnerTD

What is the difference mate? also do you run these from ignition with constant power? Would you mount this in the engine bay or under the car?

They are the same flow but the the 4601 runs at a slightly higher pressure. I commented to winnie here or in another about a 4601 as it runs at a pressure close to that of what the pump builder sets his pumps up at.

How you wire is completely up to you but if its on ignition then it makes priming the filter a breeze at service time. You could use a pressure switch also using oil pressure so it doesnt operate unless the engine is running. I still would run this through a switch so you can override it at service time.

Best to mount them as close to the tank as practical.

**nissannewby** · 23rd September 2016, 08:21 PM

Originally Posted by bigguwesty

Dam. Hopefully you haven't damaged anything else like pistons

This wont happen. Winnies pump is worn so it struggles to build pressure hence the hesitation or missing on acceleration.

**nissannewby** · 23rd September 2016, 08:22 PM

Originally Posted by threedogs

http://www.ebay.com.au/itm/222202277...%3AMEBIDX%3AIT

Ran across this and thought the way you 4.2 guys
chew out clutches you could buy a few in advance at these prices

False economy. They wouldn't even last an hour with what we are doing. They might on a granny spec na engine.

**Winnie** · 28th September 2016, 11:36 AM

I received an extra special delivery today. My new fuel pump and injectors arrived! Should be able to get them installed next week which will be awesome!

A million thank-yous to Mat for helping me out and organising it all for me!!

**nissannewby** · 28th September 2016, 11:48 AM

Enough bubble wrap in there for you? Lol

**Winnie** · 28th September 2016, 12:12 PM

Yeah it was definitely packaged with lots of love and affection!

**Winnie** · 10th October 2016, 08:01 PM

I just dropped the patrol off to my mate who us doing the install. Can't wait to pick it up on Wednesday!

AB · 10th October 2016, 08:03 PM

Originally Posted by Winnie

I just dropped the patrol off to my mate who us doing the install. Can't wait to pick it up on Wednesday!

Excitement Winnie, have you sorted out how your going to get up here for the tune?

Let us know if I can help mate.

**Winnie** · 10th October 2016, 08:10 PM

Thanks for the offer mate. Work owes me big time at the moment so I should be able to get a sneaky day off in the next month or so.

User Tag List

Thread: Winnies 747 TD42 GQ

Thread Tools

Display

The Following User Says Thank You to nissannewby For This Useful Post:

The Following 2 Users Say Thank You to nissannewby For This Useful Post:

The Following User Says Thank You to nissannewby For This Useful Post:

The Following 6 Users Say Thank You to Winnie For This Useful Post:

The Following User Says Thank You to Winnie For This Useful Post:

Posting Permissions