-
18th September 2016, 08:14 PM
#201
..................................
Last edited by mudski; 6th March 2017 at 02:55 PM.
-
The Following User Says Thank You to mudski For This Useful Post:
BigRAWesty (18th September 2016)
-
18th September 2016 08:14 PM
# ADS
Circuit advertisement
-
19th September 2016, 04:52 PM
#202
.........................
Last edited by mudski; 6th March 2017 at 02:55 PM.
-
The Following 4 Users Say Thank You to mudski For This Useful Post:
BigRAWesty (20th September 2016), Hodge (19th September 2016), jay see (19th September 2016), MB (20th September 2016)
-
19th September 2016, 11:20 PM
#203
Legendary
If you're after bit more room couldn't you get another awning side and attach it to the front..
Sent from my XT1068 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
19th September 2016, 11:24 PM
#204
.........
Originally Posted by
jay see
If you're after bit more room couldn't you get another awning side and attach it to the front.. Sent from my XT1068 using Tapatalk
You mean like an 'Oz-Tent' Jaysee :-) Luv ya Mr Mark & Family, just stirring :-)
Last edited by MB; 19th September 2016 at 11:35 PM.
-
The Following User Says Thank You to MB For This Useful Post:
mudski (20th September 2016)
-
20th September 2016, 08:34 AM
#205
Patrol God
Originally Posted by
mudski
Got to test out my ARB side awning and two awning sides with two double swags under it. Took me and the missus a bit to work out the best way to fit both swags under it for the first time setting it up, but it worked out good.
Attachment 69107
That drop slide is a god send too. So much easier to access the fridge. Money well spent in my opinion.
Is it just you and the missus in 2 seperate double swags
-
-
20th September 2016, 09:11 AM
#206
.....................................
Last edited by mudski; 6th March 2017 at 02:55 PM.
-
-
20th September 2016, 10:53 PM
#207
...........................
Last edited by mudski; 6th March 2017 at 02:54 PM.
-
-
23rd October 2016, 10:50 PM
#208
Last edited by mudski; 6th March 2017 at 02:53 PM.
-
The Following 3 Users Say Thank You to mudski For This Useful Post:
BigRAWesty (24th October 2016), Clunk (24th October 2016), jay see (23rd October 2016)
-
24th October 2016, 07:24 AM
#209
Patrol Freak
Looks good mark, nice and neat. Did you build your own cage, or is that one of the msa ones?
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
-
-
24th October 2016, 02:26 PM
#210
Originally Posted by
Bacho86
Looks good mark, nice and neat. Did you build your own cage, or is that one of the msa ones?
Sent from my iPhone using Tapatalk
Nah the MSA cage is nearly $500. I went to two local steel mobs for the mesh and they would only sell it in massive sections. Trying to declutter the garage it didnt want that so i got it from Dunn and Watson. It wasnt the right size, either too big or too small so i went the too big option and made it fit. The cage is mounted to the slide itself, not to the drawers. i had to buy longer bolts for the slide and change the slide bolts, then i could space out the side sections of the cage. Then make it up as i went to fit the top section. weird thing is the bolts that came with the cage couldn't be used for anything. Even too small too attached the top and back sections of the cage. After fitting i went for a drive and the rattle from the cage against the barrier was annoying. So a few zip ties later and is all quiet. Lol.
Sent from my GT-N7105T using Tapatalk
-
The Following 2 Users Say Thank You to mudski For This Useful Post:
Bacho86 (24th October 2016), BigRAWesty (24th October 2016)
Posting Permissions
Reply With Quote