-
9th May 2024, 01:40 AM
#10501
Breadmaker Shaker
Originally Posted by
MB
Mocked up with black tape, another Wacky MB concept
Not sure if I love it or hate it yet
Keen for your honest helpful thoughts prior to welding Team NP.com.au?
Certainly will keep I believe our pesky local Hills bugs from ram feeding into the airbox, open passenger side window for a Navi would be a lot more bearable too I imagine
The 30 degree downwards, slightly twisted final bend theory is for parked up outside/overnight camping torrential rains protection.
Have had previous plastic family GU wagon truckster ram head snorkels fill airboxes overnight and believe poor @
Rossco ‘s GQ once did the same nearly hydro-locking his beast on morning startup
EDIT: Besides looking a little kooky, not powder coated yet
Could the extra nearly say 800mm of 4” pipe potentially hinder its air intake? I’m only chasing 150rwkw again
Sent from my iPhone using Tapatalk
I’d say no bro. That 30 degree turndown lowers the intake height and if you get water coming over your window height you might be in big trouble.
Extend it up vertically at least 2 metres to be safe I reckon.
What is the charge? Eating a meal? A succulent Chinese meal??
-
The Following 3 Users Say Thank You to Plasnart For This Useful Post:
BrazilianY60 (9th May 2024), MB (10th May 2024), Stropp (9th May 2024)
-
9th May 2024 01:40 AM
# ADS
Circuit advertisement
-
9th May 2024, 02:51 AM
#10502
Patrol Guru
Originally Posted by
Plasnart
Extend it up vertically at least 2 metres to be safe I reckon.
That way he will be able to not just cross rivers but also to cross deep lakes.
-
The Following User Says Thank You to BrazilianY60 For This Useful Post:
-
9th May 2024, 05:07 PM
#10503
The master farter
Originally Posted by
AB
I would for sure.
I struggle on freeways, the Simmo trip will not be fun for me @ 110kmh
What does yours do at 100kph?
-
The Following User Says Thank You to mudski For This Useful Post:
-
9th May 2024, 05:13 PM
#10504
The master farter
Originally Posted by
Plasnart
I’d say no bro. That 30 degree turndown lowers the intake height and if you get water coming over your window height you might be in big trouble.
I think if he's got water up that high he's in the poo regardless.
Originally Posted by
Plasnart
Extend it up vertically at least 2 metres to be safe I reckon.
I have a nice looking 6inch chrome air ram here at work he could fit aswell.
-
The Following User Says Thank You to mudski For This Useful Post:
-
10th May 2024, 05:24 PM
#10505
.........
-
The Following 4 Users Say Thank You to MB For This Useful Post:
Cremulator (10th May 2024), MudRunnerTD (11th May 2024), PeeBee (10th May 2024), Stropp (12th May 2024)
-
10th May 2024, 07:27 PM
#10506
Looking good Mark. I had my staino 4" powder coated, came up really good if you want the black look
-
The Following 2 Users Say Thank You to PeeBee For This Useful Post:
MB (10th May 2024), Rossco (10th May 2024)
-
10th May 2024, 07:33 PM
#10507
Legendary
Originally Posted by
mudski
All good. I found a s/h box from a 2008 low 100thou on the clock box. George will be doing the r & r for me. Now I'm thinking do I get the Mark 10% overdrive reduction gear now, since I have saved over 2K. This would bring my revs at 100kph from 2450 to 2205rpm.
Hmmm.
Yeah do it, have the taller 5th in mine running 4.6s with 35s and 43% reduction gears and very happy with the overall gearing in the old girl. .
Sent from my SM-S711B using Tapatalk
-
The Following 5 Users Say Thank You to Rossco For This Useful Post:
BrazilianY60 (13th May 2024), MB (10th May 2024), mudski (13th May 2024), PeeBee (10th May 2024), Stropp (12th May 2024)
-
10th May 2024, 08:15 PM
#10508
Started and completed a pivot bracket for the Codan HF. Allows transport position at 30 deg tilt so it does not get clobbered from trees and branches, then undo 3 bolts and stand it upright with the antenna sections. Required a complicated 40mm RHS frame built and 6mm plate to anchor it to the POD frame and all clamped up with a greased turn plate, happy with the results, just needs the 3 tapped holes at 30 deg to complete.IMG_1913.jpgIMG_1915.jpgIMG_1911.jpg
Loving the strip lights I got from a forum vendor, Ledlightcompany.com.au. They are so bright and draw nothing, has the added feature of white and yellow, white only or yellow only. Highly recommend them. Talk to Paul, great guy.
Last edited by PeeBee; 10th May 2024 at 08:21 PM.
-
The Following 5 Users Say Thank You to PeeBee For This Useful Post:
BrazilianY60 (13th May 2024), MB (10th May 2024), Plasnart (10th May 2024), Rossco (11th May 2024), Touses (12th May 2024)
-
11th May 2024, 09:37 PM
#10509
Legendary
Not my patrol, not even a Nissan.
Helped my son install a 2" lift in his Colorado today. Was good spinning spanners, talking shit and having a couple old beverages with him..
Sent from my Pixel 7 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following 9 Users Say Thank You to jay see For This Useful Post:
BrazilianY60 (13th May 2024), MB (13th May 2024), mudski (13th May 2024), pearcey (12th May 2024), PeeBee (11th May 2024), Plasnart (11th May 2024), Rossco (11th May 2024), Stropp (12th May 2024), Touses (12th May 2024)
-
12th May 2024, 10:45 PM
#10510
Bit more progress, chest infection, again, holding me back, but baby steps get the job done. Finished the pivot mount for the big antenna, then trial fitted the new TRED boxes, ordered another 65L unit, plenty of flexibility, have the rear seat frame platform mod in reserve as well.
Tred cases option 3.jpgTred cases option 2.jpgTred cases Option 1.jpgcodan pivot assy 1.jpg
-
The Following 6 Users Say Thank You to PeeBee For This Useful Post:
10G (13th May 2024), BrazilianY60 (13th May 2024), Cremulator (12th May 2024), MB (13th May 2024), Rossco (25th May 2024), Stropp (13th May 2024)