Cremulator (5th April 2024), MB (5th April 2024)
Thanks Arfa, will definitely be trying that ASAP Legend
Sent from my iPhone using Tapatalk
Liking this bloke, thanks for your input Arfa!
Sent from my iPhone using Tapatalk
MB (5th April 2024)
Agreed @AB & @arfaBrayne Legends
Somewhat completely off topic a whisker past midnight
If for some reason folks are not trying to smash out firewood 🪵 cross cuts and are say milling like Alaskan’s for long slabs.
Too much heavy OEM saw oil will soak deep into every cut, highly recommend a second set of hands squirting say 25/75% ratio detergent/water on your bars nose tips
Your slabs will need a heap less planing/sanding for greater returns
Sent from my iPhone using Tapatalk
PeeBee (6th April 2024)
Not sure if there is any detrimental issues to the chain using drain cleaner, I will look into this though to see if there actually is though. I do see this method used a lot on the Woodcutters, chainsaw users etc forums and Face Aches pages, so theres either a lot of dumb people out there, including myself (highly possible), or it just works. Without and damage. Once out they get a good soaking and rinse in WD40 or similar, then a 24hour soak in a tub of bar oil, then as mentioned, put in zip lock bags ready to go.
I will give Arfa's method a go next as I have plenty of used sump oil here. I'm keen to see the results...
BigRAWesty (8th April 2024), MB (9th April 2024)