-
26th May 2023, 02:02 PM
#651
Legendary
Originally Posted by
mudski
The Rose joint ends. Are not designed for this type of work and wear out fast. The link part itself is fine.
No message from you mate...
Check now..
Sent from my CPH1921 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
26th May 2023 02:02 PM
# ADS
Circuit advertisement
-
26th May 2023, 05:47 PM
#652
Legendary
https://patrolapart.com.au/product/h...-patrol-gu-y61
Is this what your talking about..
Sent from my CPH1921 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
-
26th May 2023, 06:23 PM
#653
The master farter
Originally Posted by
jay see
Yep! They have seemed to have dropped the price since I last looked.
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to mudski For This Useful Post:
-
23rd December 2023, 11:37 PM
#654
Legendary
My control box has been sitting on a couple of dodgy brackets and some cable ties for long enough. I would like to mount it behind the bar as there's heaps of room and it will be better protected, but for now this would do..
Sent from my Pixel 7 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
29th December 2023, 08:54 AM
#655
The master farter
Looks like you have plenty of room to hide it in the bar there mate.
Sent from my iPhone using Tapatalk
-
-
21st February 2024, 09:32 PM
#656
Legendary
-
The Following User Says Thank You to jay see For This Useful Post:
mudski (21st February 2024)
-
21st February 2024, 10:21 PM
#657
The master farter
What’s it like with the new pipe?
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to mudski For This Useful Post:
jay see (22nd February 2024)
-
22nd February 2024, 06:05 AM
#658
Legendary
Originally Posted by
mudski
What’s it like with the new pipe?
Sent from my iPhone using Tapatalk
Sounds better and there's no more leaks. Haven't got it out for a decent run yet..
Sent from my Pixel 7 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
mudski (22nd February 2024)
-
23rd February 2024, 09:11 PM
#659
Legendary
-
The Following 3 Users Say Thank You to jay see For This Useful Post:
AB (23rd February 2024), MB (24th February 2024), mudski (5th March 2024)
-
2nd March 2024, 08:39 PM
#660
Legendary
Ok, just about got everything done in the driveway at home.
The ac compressor has decided that it doesn't want to come out. Got the 2 bolts from underneath out and one next to the engine mount, there's one more somewhere between the tensioner and the compressor. I've taken out the only 2 that I can see and it still won't budge. It needs to pull away from the block but it won't..
That and the trailing arms, which are going to be fun to get out. Not looking forward to tomorrow.
A bit of battle scars.
Took off some skin when the end of the spanner which I was using as leverage slipped and caught my skin.
Sent from my Pixel 7 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following 2 Users Say Thank You to jay see For This Useful Post:
MB (3rd March 2024), mudnut (2nd March 2024)