Tillix boost control removal for engineering certificate
Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Tillix boost control removal for engineering certificate
Good day,
Going through the process of registering ACT and asked me to get an engineering certificate specially for suspension mods. 2016 ZD30
Question, when I met with one of the guys (listed as approved certifiers) , he asked me to remove the boost controller .
Below are few images, I have g&l eco shop with hi flow Garrett turbo non ZD30.
is this straightforward as replacing T socket with straight socket and cap on air cleaner side. or additional things involved after removing. (for few days). does anyone know place in ACT to get this done/checked?
A much simpler way would to be to hide the valve from sight. Buy some longer tube and run it so its clearly out of sight. Thats what I did form my engineers cert. Zip tied it on the underside of the intercooler.
A much simpler way would to be to hide the valve from sight. Buy some longer tube and run it so its clearly out of sight. Thats what I did form my engineers cert. Zip tied it on the underside of the intercooler.
Maybe even put some split tube around it to look like wiring. But yes definitely hide the controller.
What ever is needed to keep the inspector happy short term but would be best keeping the boost controller in the sys (hidden out of the way) as the high flow turbo fitted most likely could push 30psi. So best to have a cap on that.
Question @omi-y61 have you a ECM remap and what max boost you running at the moment?