Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
I made one years ago for my GQ, i actually made it to help with Bow wave for River crossings and Mud bog holes. It was an easy thing to bend up. I screwed it to he chassis crossover and the base of the radiator support. worked a treat. I think @AB might now have it on his car. It was mega easy to work out. 3 section, 2 fold piece. each fold is 45degrees.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!! ....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
Originally Posted by Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever. WARNING: Towballs used for recoveries can, and do kill people and damage property.
I made one years ago for my GQ, i actually made it to help with Bow wave for River crossings and Mud bog holes. It was an easy thing to bend up. I screwed it to he chassis crossover and the base of the radiator support. worked a treat. I think @AB might now have it on his car. It was mega easy to work out. 3 section, 2 fold piece. each fold is 45degrees.
I never fitted it and @Rossco stole it off me years ago lol
Had one of those front bash plates that bolt to chassis rails but totally be a bad outcome if jammed up into the steering linkages, so took to it with an angle grinder, cut 70mm off lip and bought some 20mm conveyor belt scrap that will be attached (maybe metal strip w/nuts, bolts) _ cardboard is the concept (fill in gap between rails). Finish it some day.