Lithium battery container

[rusty_nail]

Yes mate, that was another thought to have a little shed few meters away from the main shed so if it goes up in smoke then who cares but temps might still be a problem. Could also run a little heat matt like in home brew under the battery in winter.
I have to consider power cable length and communication cable between battery and inverter


Sent from my iPhone using Tapatalk

I have a "smart" heat belt for my home brew surely it would be fairly.effective to keeping the batteries warmer. Lining the shed in foam would be pretty effective to keeping it a more consistent temp esp in summer.

Re the cost of cable etc cheaper than insurance/replacing the whole shed right?

Sent from my SM-G988B using Tapatalk

[Maxhead]

I have a "smart" heat belt for my home brew surely it would be fairly.effective to keeping the batteries warmer. Lining the shed in foam would be pretty effective to keeping it a more consistent temp esp in summer.

Re the cost of cable etc cheaper than insurance/replacing the whole shed right?

Sent from my SM-G988B using Tapatalk

Yeah mate, I thought about that fridge panel stuff or foam but that shit would catch on like an inferno unless I’m missing something and there is something that won’t burn.
Heat mat would work I reckon.
Yes you are right cable would only be a few hundred so no issue I suppose


Sent from my iPhone using Tapatalk

[rusty_nail]

Yeah mate, I thought about that fridge panel stuff or foam but that shit would catch on like an inferno unless I’m missing something and there is something that won’t burn.
Heat mat would work I reckon.
Yes you are right cable would only be a few hundred so no issue I suppose


Sent from my iPhone using Tapatalk

With limited exceptions like firebrick (high alu concentrated brick) or metal everything has a combustion point right? Foam will catch alight just like any other sort of insulator but it will also do the best job at keeping the battery to a consistent state helping keep from any failures due to temperature stresses?

Sent from my SM-G988B using Tapatalk

[Maxhead]

With limited exceptions like firebrick (high alu concentrated brick) or metal everything has a combustion point right? Foam will catch alight just like any other sort of insulator but it will also do the best job at keeping the battery to a consistent state helping keep from any failures due to temperature stresses?

Sent from my SM-G988B using Tapatalk

Yes sorry I’m with ya now! I’m overthinking the idea.
Small insulated shed and temperature controlled heat matt just be work spot on.


Sent from my iPhone using Tapatalk

[rusty_nail]

Yes sorry I’m with ya now! I’m overthinking the idea.
Small insulated shed and temperature controlled heat matt just be work spot on.


Sent from my iPhone using Tapatalk

Winner good luck mate!

Sent from my SM-G988B using Tapatalk