-
8th August 2022, 12:29 PM
#1
ZD30 will torque converter and plate fit to a manual engine
Hi, Engine in my auto has done 360K and have just sheared the little dowel from timing sprocket driving the cams, so same result as broken timing chain. I can get a manual engine and just do a swap "IF" its possible to swap the flywheel for the existing plate on the back of my existing engine, which is auto.
Thanks David
,
-
-
8th August 2022 12:29 PM
# ADS
Circuit advertisement
-
9th August 2022, 07:51 AM
#2
The master farter
I can't see why not. People are doing auto to manual conversions, vice versa, all the time.
-
The Following User Says Thank You to mudski For This Useful Post:
Dagwill (9th August 2022)
-
9th August 2022, 08:18 AM
#3
Patrol Freak
Maybe someone could check on their Nissan Fast to see if cranks are the same part #.
I can't see Nissan complicating production by having a different crank for manual or auto when there's no logical reason for it.
John
2001 GUII TI 4500 - Now converted to TD42T auto with Nomad valve body
-
The Following User Says Thank You to jff45 For This Useful Post:
Dagwill (9th August 2022)
-
9th August 2022, 08:39 AM
#4
The master farter
Originally Posted by
jff45
Maybe someone could check on their Nissan Fast to see if cranks are the same part #.
I can't see Nissan complicating production by having a different crank for manual or auto when there's no logical reason for it.
Might be onto something John. But all these part numbers could well supersede to the one part number which this doesn't say.
zd.jpg
-
The Following 2 Users Say Thank You to mudski For This Useful Post:
Dagwill (9th August 2022), jff45 (10th August 2022)
-
10th August 2022, 08:19 AM
#5
Patrol Freak
Cheers, Mark. Looks like the ZDs between 11.2002 & 08.2005 didn't have a crankshaft
John
2001 GUII TI 4500 - Now converted to TD42T auto with Nomad valve body
-