-
12th July 2022, 06:47 PM
#1
-
-
12th July 2022 06:47 PM
# ADS
Circuit advertisement
-
12th July 2022, 06:49 PM
#2
The master farter
Probably for that or the TB engine mounting points as the block casting is the same I believe.
Sent from my iPhone using Tapatalk
-
The Following 2 Users Say Thank You to mudski For This Useful Post:
MB (12th July 2022), Rossco (12th July 2022)
-
12th July 2022, 08:26 PM
#3
-
-
12th July 2022, 08:36 PM
#4
Patrol God
Originally Posted by
MB
Cheers Mudski Mate
Reading that just got me excited starring hard at a TB Maverick outside the shed.
Would it in theory be possible to TB block rebuild with a TD head and other internals required?
Sent from my iPhone using Tapatalk
No.
TD blocks are a dry liner block. The old ones get pushed out and the new ones get pressed in and then usually honed to finish. Rebuilding TD42's is a fine art. You need to find a good builder who has good experience in rebuilding them. Little things like not using liquid nitrogen to install the new liners. Making sure the parent bores are in good condition and if machined are machined correctly. Liner protrusion is also a big one. Little things on the procedure help here. For example if the block needs decking then it needs to be done prior to liner installation. Then if the liner protusion needs to be reduced then this will be done once they are pressed home.
-
The Following 4 Users Say Thank You to nissannewby For This Useful Post:
MB (12th July 2022), PeeBee (12th July 2022), Plasnart (12th July 2022), Rossco (12th July 2022)
-
12th July 2022, 08:39 PM
#5
Patrol God
The blocks were used in a multitude of applications. Anywhere from our humble patrol to a bus as you mention also forklifts and marine applications.
-
The Following 2 Users Say Thank You to nissannewby For This Useful Post:
MB (12th July 2022), PeeBee (12th July 2022)
-
12th July 2022, 08:40 PM
#6
Breadmaker Shaker
Originally Posted by
MB
Cheers Mudski Mate
Reading that just got me excited starring hard at a TB Maverick outside the shed.
Would it in theory be possible to TB block rebuild with a TD head and other internals required?
Sent from my iPhone using Tapatalk
Now Marko, just get the bloody GQ rebuilt and going again....then think of Frankensteining anything else later!! You are the crazy scientist of this forum we know, but at least keep one powerhorse in plowing mode please.
What is the charge? Eating a meal? A succulent Chinese meal??
-
The Following 2 Users Say Thank You to Plasnart For This Useful Post:
MB (12th July 2022), Rossco (12th July 2022)
-
12th July 2022, 09:01 PM
#7
.........
-
The Following 2 Users Say Thank You to MB For This Useful Post:
PeeBee (12th July 2022), Rossco (12th July 2022)
-
12th July 2022, 09:59 PM
#8
Legendary
Yeah fark seems everything has just gone crazy atm . . . Dropped into Boss Aluminium today to enquire about a couple boxes for some work utes which they've done before but aren't even doing anything custom as have massive backlog of standard stuff with 30 week minimum. . Seems everywhere you go things are out of control damitt. . .
Sent from my SM-G781B using Tapatalk
-
The Following User Says Thank You to Rossco For This Useful Post:
-
12th July 2022, 10:31 PM
#9
Originally Posted by
Rossco
Yeah fark seems everything has just gone crazy atm
. . . Dropped into Boss Aluminium today to enquire about a couple boxes for some work utes which they've done before but aren't even doing anything custom as have massive backlog of standard stuff with 30 week minimum. . Seems everywhere you go things are out of control damitt. . .
Sent from my SM-G781B using Tapatalk
At least the story is consistent as they said the same for tray and canopy and that was even after they moved into bigger premises
-
The Following 2 Users Say Thank You to PeeBee For This Useful Post:
MB (12th July 2022), Rossco (13th July 2022)
-
13th July 2022, 02:34 AM
#10
Patrol God
@MB do you have a budget?
-
The Following User Says Thank You to nissannewby For This Useful Post: