-
17th May 2022, 08:46 PM
#1
Travelling Podologist
Part ID please - the cause of water getting into my cab
I thought I'd forded the two 800mm deep rivers without getting any water in the GU's cab, but a couple of days later discovered some had seeped in on the driver side. Finding where it got in was a bit of a mystery, but I think that has now been solved.
In the DX ute , possibly other GU's too, there is a clip on piece of plastic trim on the floor which straddles the door sill. Inside the cab it has 4 'pins' which insert into 'rectangular' plastic receivers which are a push fit into the floor pan. One of these has had a hole smashed in it underneath the floor. For now I have wrapped it in tape & smeared silicone over that.
Can anyone tell me what these 'receivers' are called or give me a part number for them?
2006 4.2TDi ex-Telstra Remote area Camper. 425w roof mounted solar, 360Ah Aux batts, BCDC1240, Onboard hot & cold pressurised & filtered water, (25 litre hot water calorifier), ARB fridge, ARB freezer, Built in kitchen, heaps of easy access storage, 240v, 3 Genie exhaust + dynotune, 2 lift, 3900kg GVM upgrade, second glovebox, ROH Blaktrak steel wheels, Bridgestone D697's (now Toyo RT's), Redarc gauges/pillarpod, Hema HX-1, Icom 450 CB, dual rear view cameras, Onboard 30amp Victron mains charger, second glovebox, dual seat conversion, TPMS, Boss PX7 onboard air with 9 litre tank, 350w inverter, Steel bullbar, Harrop Eaton diff lock (front), Warn winch, Snorkel, Dual spares , 160 litre water tank, 180 litre fuel in two tanks (approx 1200km range) 2010 Tvan Tanami. (incl another 70 litre water tank) with matching wheels/tyres (& 3rd spare)
A Nomadic Life (Blog)
-
The Following User Says Thank You to Cuppa For This Useful Post:
-
17th May 2022 08:46 PM
# ADS
Circuit advertisement
-
17th May 2022, 10:17 PM
#2
Patrol God
2003 gu3 td42tdi sold 😞 bloody gvm towing crap. Bt50 3500kg gvm.
-
The Following 2 Users Say Thank You to Stropp For This Useful Post:
Cremulator (19th May 2022), Cuppa (18th May 2022)
-
19th May 2022, 03:31 PM
#3
Patrol Guru
Here is the same part on partsouq for $0.75
Not sure about postage though.
https://partsouq.com/es/search/all?q=0155303643
-
-
19th May 2022, 07:46 PM
#4
Moderator
Bhahahahaha!!!! $8.62 versus 75c..... A disgrace really!
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following 2 Users Say Thank You to MudRunnerTD For This Useful Post:
Cuppa (19th May 2022), Rossco (19th May 2022)
-
19th May 2022, 08:41 PM
#5
SUCH IS LIFE
Originally Posted by
MudRunnerTD
Bhahahahaha!!!! $8.62 versus 75c..... A disgrace really!
Id go the 8.62 option if you look at he the shipping cost of the .75c one
Sent from my iPhone using Tapatalk
________________________
______ 2017 D-Max _______
I don't have a short temper. I just have a quick reaction to bullshit
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following 4 Users Say Thank You to Maxhead For This Useful Post:
Cremulator (19th May 2022), Cuppa (19th May 2022), Rossco (19th May 2022), Winnie (19th May 2022)
-
19th May 2022, 09:08 PM
#6
.........
Part ID please - the cause of water getting into my cab
Originally Posted by
Cuppa
..For now I have wrapped it in tape & smeared silicone over that.
Can anyone tell me what these 'receivers' are called or give me a part number for them?
Knead It and or JB Weld style steel putties, always carry Cuppa Mate, itll outlast any placcy plug that you or I never knew existed anyways?
Sent from my iPhone using Tapatalk
-
The Following 2 Users Say Thank You to MB For This Useful Post:
Cuppa (19th May 2022), Maxhead (20th May 2022)