-
22nd October 2021, 08:29 PM
#13811
Daily Lurker
Originally Posted by
mudski
Yep but both ovens will need to come out for the carcass to be removed. We’ll see what Freedom have to say when they eventually reply…
Sent from my iPhone using Tapatalk
I'm not sure that's the case mate. Like I said, doesn't look like it would be constructed the way you think it looks. No cabinet maker in their right mind would make it that way
Sent from my SM-G965F using Tapatalk
-
The Following User Says Thank You to rusty_nail For This Useful Post:
MudRunnerTD (24th October 2021)
-
22nd October 2021 08:29 PM
# ADS
Circuit advertisement
-
23rd October 2021, 11:53 PM
#13812
Dribble Master
Originally Posted by
mudski
So after having the second oven sitting on the floor for month as the electrician wasn’t allowed to get in a instal it in the new kitchen, he finally could yesterday.
I’m speechless.
Attachment 84499
Sent from my iPhone using Tapatalk
Put a lift up cupboard door on it.... job done
Posting bollox using Tapatalk
-
-
24th October 2021, 07:17 AM
#13813
The master farter
What has made you Angry Today???????
Originally Posted by
rusty_nail
I'm not sure that's the case mate. Like I said, doesn't look like it would be constructed the way you think it looks. No cabinet maker in their right mind would make it that way
Sent from my SM-G965F using Tapatalk
IMG_4176.jpg
Looks to me that’s how it’s done. So removing the top cupboard to put a bigger one isn’t really doable.
But I’m far from an expert in this field so we’ll wait to see what Freedom have to say.
Sent from my iPhone using Tapatalk
Last edited by mudski; 24th October 2021 at 07:21 AM.
-
-
24th October 2021, 07:20 AM
#13814
The master farter
Originally Posted by
Clunk
Put a lift up cupboard door on it.... job done
Posting bollox using Tapatalk
Yeah I’m thinking using that space as a small cabinet and the lift up door above to be made longer to cover the extra space. So just have one door for both cavities…
Sent from my iPhone using Tapatalk
-
-
24th October 2021, 07:30 AM
#13815
Daily Lurker
Originally Posted by
mudski
IMG_4176.jpg
Looks to me that’s how it’s done. So removing the top cupboard to put a bigger one isn’t really doable.
But I’m far from an expert in this field so we’ll wait to see what Freedom have to say.
Sent from my iPhone using Tapatalk
Fair enough mate. That photo doesn't really tell much. The only way to know will be to look at what the top door hinges are mounted too. Good luck with it mate
Sent from my SM-G965F using Tapatalk
-
-
24th October 2021, 08:37 AM
#13816
Moderator
Originally Posted by
mudski
IMG_4176.jpg
Looks to me that’s how it’s done. So removing the top cupboard to put a bigger one isn’t really doable.
But I’m far from an expert in this field so we’ll wait to see what Freedom have to say.
Sent from my iPhone using Tapatalk
Bigger. Yes both ovens out. You can see the double skin. If Freedom had all the dimensions then it's their error. They will have to make a whole new carcass. Remove and refit of ovens will be on them too. They are in the business, this will be a common error they have to manage. It should be pretty painless.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following 2 Users Say Thank You to MudRunnerTD For This Useful Post:
mudski (24th October 2021), rusty_nail (24th October 2021)
-
24th October 2021, 05:55 PM
#13817
The master farter
Originally Posted by
MudRunnerTD
Bigger. Yes both ovens out. You can see the double skin. If Freedom had all the dimensions then it's their error. They will have to make a whole new carcass. Remove and refit of ovens will be on them too. They are in the business, this will be a common error they have to manage. It should be pretty painless.
Should is the key word. But they were pretty good with the other issue there was with the kitchen prior. Just more of a nuisance than anything.
Sent from my iPhone using Tapatalk
-
-
27th October 2021, 06:39 AM
#13818
The master farter
Well we have egg on our face as they say. Upon closer inspection to the original kitchen plans. The gap above the ovens has an infill panel. I took it for a drawer or something. No panel in sight though so we’ll get one made.
Sent from my iPhone using Tapatalk
-
-
27th October 2021, 10:31 PM
#13819
Dribble Master
Originally Posted by
mudski
Well we have egg on our face as they say. Upon closer inspection to the original kitchen plans. The gap above the ovens has an infill panel. I took it for a drawer or something. No panel in sight though so we’ll get one made.
Sent from my iPhone using Tapatalk
I'd still put a lift up door on it, handy little place for baking trays, grills etc
Posting bollox using Tapatalk
-
The Following User Says Thank You to Clunk For This Useful Post:
mudski (28th October 2021)
-
27th October 2021, 10:46 PM
#13820
.........
Angry……?
Silver lining deliberate built stash place
https://youtu.be/Ah1GDfmYQyw
Sent from my iPhone using Tapatalk
-
The Following 3 Users Say Thank You to MB For This Useful Post:
Clunk (28th October 2021), Cremulator (28th October 2021), mudski (28th October 2021)