-
13th July 2021, 11:19 PM
#11
Patrol God
I did read that the Runvas have a braking mech in the gearbox, not inside the spool.
-
The Following User Says Thank You to mudnut For This Useful Post:
-
13th July 2021 11:19 PM
# ADS
Circuit advertisement
-
13th July 2021, 11:24 PM
#12
Legendary
Originally Posted by
Hodge
Runva all the way.
Stay away from Carbon is all I will recommend.
Sent from my Pixel 3a XL using Tapatalk
https://www.productreview.com.au/lis...synthetic-rope
Check out the last review and photos.
Sent from my CPH1979 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
-
13th July 2021, 11:31 PM
#13
Legendary
Originally Posted by
mudnut
I did read that the Runvas have a braking mech in the gearbox, not inside the spool.
Yeah, they call it a ratchet system. It's to prevent heat from a traditional drum brake.
Sent from my CPH1979 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
-
14th July 2021, 07:17 AM
#14
Patrol God
Originally Posted by
jay see
If I showed you and told you my recent experience with them. You wouldn't believe me.
I won't drag names through mud on here.
But like I said , I recommend you steer clear.
Check your PM .
Sent from my Pixel 3a XL using Tapatalk
-
-
14th July 2021, 11:03 AM
#15
Patrol God
-
The Following User Says Thank You to mudnut For This Useful Post:
-
17th July 2021, 02:26 PM
#16
Legendary
Ok.
I've disconnected everything going to the solenoid, the neg and the red terminal from the winch do its free on any power. Then I connected a battery, neg to neg on winch and positive to red on winch. Got a little spark on contact, but no movement at all. Am I doing this correct??
While all connected to the external battery it goes from 12.2v - 6.0v. is there not enough juice in the battery to get it moving or is the winch dead??
Sent from my CPH1979 using Tapatalk
Last edited by jay see; 17th July 2021 at 02:30 PM.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
17th July 2021, 02:46 PM
#17
Legendary
I think is safe to say that it's dead, If I have done this right.
Tried it again, but this time connected to the car battery and engine running, no difference.
Now if I get a bare winch I run all my existing cables, solenoid and rope everything should fit just a remove and replace yeah....
EDIT....
And I also connected a cable (the brown one in the pic) from the red terminal to the yellow one with no difference.
Sent from my CPH1979 using Tapatalk
Last edited by jay see; 17th July 2021 at 03:30 PM.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
17th July 2021, 05:49 PM
#18
Last edited by PeeBee; 17th July 2021 at 06:20 PM.
-
The Following 2 Users Say Thank You to PeeBee For This Useful Post:
jay see (17th July 2021), mudnut (17th July 2021)
-
17th July 2021, 06:25 PM
#19
Legendary
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
-
17th July 2021, 06:51 PM
#20
Patrol God
Is it a wireless controller, or the cable unit? Maybe a wire is loose inside the control box.
-
The Following User Says Thank You to mudnut For This Useful Post: