-
21st November 2020, 06:51 PM
#1
New y62 Park to Reverse - resistance / difficulty moving to Reverse. Thud.
hey finally picked up the y62. It's huge and very comfortable.
It's about 500kms old
My wife mentioned that the drive selector is difficult to go from P to R and thuds into Reverse. I wouldn't expect this from a new car.
It also shifts roughly from time to time, but I haven't worked out the exact sequence that occurs in.
Should I be concerned? Has anyone else noticed this?
cheers,
Rich
-
-
21st November 2020 06:51 PM
# ADS
Circuit advertisement
-
22nd November 2020, 09:26 AM
#2
Patrol God
If they parked on a bit of a slope some people have mentioned the hard to shit or making a clunk going from park to reverse,if so try putting the handbrake on then going into park,like you say it's a big car and alot of weight on the transmission especially if on a hill
Sent from my SM-A205YN using Tapatalk
Watch this space, as there maybe a comment added soon
-
-
22nd November 2020, 11:54 AM
#3
Patrol God
Originally Posted by
Richmc
hey finally picked up the y62. It's huge and very comfortable.
It's about 500kms old
My wife mentioned that the drive selector is difficult to go from P to R and thuds into Reverse. I wouldn't expect this from a new car.
It also shifts roughly from time to time, but I haven't worked out the exact sequence that occurs in.
Should I be concerned? Has anyone else noticed this?
cheers,
Rich
I would mention it to the dealer so at least
its on their books in case it is a bigger problem
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
22nd November 2020, 02:28 PM
#4
Hardcore
As Avo said, put the park brake on, let the car rest on the park brake , then select park, also don't forget its designed to be used with a leg/foot. so don't be afraid to give it a fair old shove toward the floor.
Give your gear box some more time . it should settle in and may still be learning the way you drive, mine was the same but all good after a few thousand ks.
Last edited by 04OFF; 22nd November 2020 at 02:31 PM.
-