-
25th May 2020, 09:40 PM
#341
Advanced
Originally Posted by
mudski
Once the tags are on, I'll be sending it off to be sandblasted then powdercoated. Any suggestions before I take it away?
How are the moccy's holding up??? Need a new pair yet or getting them sandblasted as well!!!
Have you done a test fit to the vehicle? How much plastic grill do you have to remove?
Cheers
Trevor
-
-
25th May 2020 09:40 PM
# ADS
Circuit advertisement
-
25th May 2020, 09:58 PM
#342
The master farter
Originally Posted by
tryan277
How are the moccy's holding up??? Need a new pair yet or getting them sandblasted as well!!!
Have you done a test fit to the vehicle? How much plastic grill do you have to remove?
Cheers
Trevor
Mate the moccos are holding up really well. I will require a new pair though, which I'll get as soon as the Vic markets re open. Lol. Not sure on how much grille I'll have to remove, I'll get to that when it comes to fitting it up.
-
-
26th May 2020, 07:55 PM
#343
The master farter
Mudski's High Warn High Mount Rebuild into an ARB GU Bar
So now I have to wait until ARB get my bits in. I hate waiting....
So I’ve pulled the dash apart and will start on the in cab wiring of the isolator and winch in/out switch.
Looking at the back on the in/out switch there’s too many pins, 7 of them. Lol. Anyone have a wiring diagram for this part?
Adjustments.jpg
IMG_2975.jpg
Sent from my iPhone using Tapatalk
-
-
26th May 2020, 07:58 PM
#344
The master farter
Mudski's High Warn High Mount Rebuild into an ARB GU Bar
I’m going to move my light bar and spotties switch to down on the gear shift console too so the winch switches will be in the best spot.
Adjustments.jpg
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to mudski For This Useful Post:
-
26th May 2020, 08:49 PM
#345
Legendary
Originally Posted by
mudski
So now I have to wait until ARB get my bits in. I hate waiting....
So I’ve pulled the dash apart and will start on the in cab wiring of the isolator and winch in/out switch.
Looking at the back on the in/out switch there’s too many pins, 7 of them. Lol. Anyone have a wiring diagram for this part?
Adjustments.jpg
IMG_2975.jpg
Sent from my iPhone using Tapatalk
Hopefully this helps. .
Sent from my SM-G930F using Tapatalk
-
The Following 2 Users Say Thank You to Rossco For This Useful Post:
mudski (26th May 2020), PeeBee (26th May 2020)
-
26th May 2020, 09:58 PM
#346
Legendary
Originally Posted by
mudski
So now I have to wait until ARB get my bits in. I hate waiting....
So I’ve pulled the dash apart and will start on the in cab wiring of the isolator and winch in/out switch.
Looking at the back on the in/out switch there’s too many pins, 7 of them. Lol. Anyone have a wiring diagram for this part?
Adjustments.jpg
IMG_2975.jpg
Sent from my iPhone using Tapatalk
I can't remember for the life of me mate. Might have something on my build thread if not there's always your two other friends Google and YouTube..
Sent from my CPH1979 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following 2 Users Say Thank You to jay see For This Useful Post:
mudski (26th May 2020), Rossco (27th May 2020)
-
26th May 2020, 10:31 PM
#347
Legendary
Originally Posted by
mudski
Mate the moccos are holding up really well. I will require a new pair though, which I'll get as soon as the Vic markets re open. Lol.
https://www.facebook.com/groups/1444...8026831490128/
Sent from my CPH1979 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
-
27th May 2020, 08:15 AM
#348
The master farter
Originally Posted by
Rossco
Hopefully this helps. .
Sent from my SM-G930F using Tapatalk
Thanks.
Just gotta work out the schematics of it all. Do I need to use any relays? Also I'm thinking of getting some small 2mm, or similar, 7 core trailer wire and use this as a loom to out of the cab. I should need anything heavier you think?
-
-
27th May 2020, 11:16 AM
#349
Legendary
Yeah think I just sketched it all before I did it to get my head around it all. Trailer wire should be fine, don't need any relays big solenoid does everything. Worth thinking about when you do it is putting buttons up front on the bar very very handy and also some strip lighting above the winch which picks up power fron the isolator, very handy in the dark obviusly. . .
Sent from my SM-G930F using Tapatalk
-
The Following 2 Users Say Thank You to Rossco For This Useful Post:
mudski (27th May 2020), Winnie (27th May 2020)
-
27th May 2020, 11:28 AM
#350
The 747
Originally Posted by
Rossco
Yeah think I just sketched it all before I did it to get my head around it all. Trailer wire should be fine, don't need any relays big solenoid does everything. Worth thinking about when you do it is putting buttons up front on the bar very very handy and also some strip lighting above the winch which picks up power fron the isolator, very handy in the dark obviusly. . .
Sent from my SM-G930F using Tapatalk
Yep buttons on the bar are a must! I left them out and really regret it, running out the winch rope solo is a mission now. Need to find some motivation to add them in.
A light above the winch that illuminates when you activate the in cab isolation switch is also a bloody good idea too, I didn't do that either damn it.
Sent from my SM-G960F using Tapatalk
-
The Following User Says Thank You to Winnie For This Useful Post: