-
24th February 2019, 04:00 PM
#1
Advanced
Wanted: Used 3 inch turboback exhaust for y61 patrol
After a preloved turboback 2.75 or 3 inch exhaust for my 2009 Y61 Patrol. Preferably with just a cat and no resonator/muffler.
Thanks in advance.
Sent from my ONEPLUS A6000 using Tapatalk
Last edited by Salim; 25th February 2019 at 08:12 AM.
-
-
24th February 2019 04:00 PM
# ADS
Circuit advertisement
-
24th February 2019, 05:59 PM
#2
Patrol Guru
I reckon you'd be better off just buying new.. theres a few decent cheapies about now. Don't know how many people would be tearing off a pefectly good 3in unless they were upgrading to stainless.
-
-
24th February 2019, 06:26 PM
#3
Advanced
Originally Posted by
0-TJ-0
I reckon you'd be better off just buying new.. theres a few decent cheapies about now. Don't know how many people would be tearing off a pefectly good 3in unless they were upgrading to stainless.
Yeah I was thinking the same but thought I'd give this a try in case someone wanted to change back to stock for some reason
Sent from my ONEPLUS A6000 using Tapatalk
-
-
24th February 2019, 11:33 PM
#4
Daily Lurker
Most after market exhausts for the 3L are 2.75 inch any way mate, I think you'll struggle to find what you're after hey
Sent from my SM-G930F using Tapatalk
-
-
25th February 2019, 08:13 AM
#5
Advanced
Originally Posted by
rusty_nail
Most after market exhausts for the 3L are 2.75 inch any way mate, I think you'll struggle to find what you're after hey
Sent from my SM-G930F using Tapatalk
I don't mind 2.75 either. It's worth a try I guess!
-
-
25th February 2019, 09:51 AM
#6
Patrol Freak
Try ZD warriors(FB).
If not cheap and local, I would not bother and go buy a new sys.
I have a muffler delete pipe for 4WDSupacenter Dominator 8r SS 3" and the second pipe/flex joint section(total $80). These exhausts are made by Berklee, Vic. Contact: Rick van Berkel(owner) <rick@berklee.com.au>
https://www.berklee.com.au/contact.php
I use this exhaust sys but prefer a muffler fitted "have a stock muffler spare - no cost to you (had them make me up a 50% greater flow muffler).
Contact them see what dollars for dump pipe and last section (tail pipe) and get a price also for complete sys. Postage is the concern for second hand mate.
There are plenty 3" exhaust sys available for CRD on the market (new).
2008 GU WAG ST Manual CRD - To do the job
-
The Following User Says Thank You to Bidja For This Useful Post:
Salim (25th February 2019)
-
25th February 2019, 10:01 AM
#7
Advanced
Originally Posted by
Bidja
Try ZD warriors(FB).
If not cheap and local, I would not bother and go buy a new sys.
I have a muffler delete pipe for 4WDSupacenter Dominator 8r SS 3" and the second pipe/flex joint section(total $80). These exhausts are made by Berklee, Vic. Contact: Rick van Berkel(owner) <rick@berklee.com.au>
https://www.berklee.com.au/contact.php
I use this exhaust sys but prefer a muffler fitted "have a stock muffler spare - no cost to you (had them make me up a 50% greater flow muffler).
Contact them see what dollars for dump pipe and last section (tail pipe) and get a price also for complete sys. Postage is the concern for second hand mate.
There are plenty 3" exhaust sys available for CRD on the market (new).
Thanks a lot Bidja! I'll get back to you
-
-
6th May 2019, 08:59 PM
#8
I have a full 3 inch exhaust i will be getting rid of soon.
Its off a 1998 gu patrol tb4500.
You'll need to modify the down pipe as its to suit an xr6turbo engine
-