Sand Flags / Mine Whips

[Sir Roofy]

If your stuck mark i have one you can borrow sits on the bull bar
had it for the simmo and madigan line

[MB]

Thanks heaps Gents, more than appreciated, AB’s lost his Simo one too so we’re looking to kit up properly for family futures now. Daz is kindly checking his new Autoelec ones specs in the shed and we’re hoping 4x4 Obsession will have a couple in stock for us pre Xmas, Cheers All Legends


Sent from my iPhone using Tapatalk

[threedogs]

G’day Team,
Looking to safely take our girls over some sand dunes in early 2019 for their first times.
Was kindly hoping for some top advice on Flag/Whip brands, lasting quality, legally required heights if any?
Many thanks in advance!
Mark & Family


Sent from my iPhone using Tapatalk

have two here you can borrow at anytime comes with the bracket

[Winnie]

Yeah my home made one that I used for the simmo did not fare well so I've done it properly this time and ordered this.
https://rover.ebay.com/rover/0/0/0?m...2F291639994265

Sent from my SM-G960F using Tapatalk

[gaddy]

I use a old 2.5m vhf marine whip , love it because it is nice and stiff , and doesn't wave all over the place , that drives me nuts ! from a driver perspective.

Sent from my SM-G900I using Tapatalk

[mudski]

Let me know if you want the bracket mate. I can drop it off this weekend.

[Brissieboy]

Yeah my home made one that I used for the simmo did not fare well so I've done it properly this time and ordered this.
https://rover.ebay.com/rover/0/0/0?m...2F291639994265

or this at $95:
https://www.ebay.com.au/itm/Tuff-Ter...53.m1438.l2649

[mudski]

or this at $95:
https://www.ebay.com.au/itm/Tuff-Ter...53.m1438.l2649

Thats the same as what I got from autoelec au.

[MudRunnerTD]

Yeah my home made one that I used for the simmo did not fare well so I've done it properly this time and ordered this.
https://rover.ebay.com/rover/0/0/0?m...2F291639994265

Sent from my SM-G960F using Tapatalk

Thats what i got from 4WD Obsession. The RRP on the tag was $115 but i got 10% off when i bought it with my clutch work.

I unwrapped it earlier and its solid kit. Heavy. 3 piece. Each end is threaded so you can run it as a 2m or 3m pole. Im pretty impressed on closer inspection

[Rossco]

Got my one from outback 4wd in baysie, reckon he'd have a few in stock 4 sure. Think I've seen them on the shelf @ Yarra Valley 4wd too, going there friday if got want me to look out or grab 1. . .

Sent from my SM-G930F using Tapatalk