-
11th September 2018, 10:30 AM
#191
@mudnut on your snorkel post earlier (page 13 from memory). Have you done anything to seal the top of the airbox to the carby? I know there's a rubber seal there, but IMO it's a weakpoint and whilst I haven't had issues yet, it's next on my to do list (make up an airbox so I can have a silicone bend clamped to top of the carby).
-
-
11th September 2018 10:30 AM
# ADS
Circuit advertisement
-
11th September 2018, 03:06 PM
#192
Patrol God
Just a large washer and a piece of inner tube.
The real worry is the pre-heat flap inlet and vacuum diaphragm casing.
I ran a bead of silicon on the top and used a reducer and plug on the inlet but found it was too restrictive in cold weather with the plug removed.
I will probably get a full sized aluminium plug machined up and seal it with a fine bead of silicon so it can be removed in winter.
My advice is: not to follow my advice.
-
-
12th September 2018, 12:16 PM
#193
Think I'm going to do away with the airbox completely and move to a patroldocta style one or similar. Have heard most people block off the vac lines from carby to airbox with no ill effects, anyone know what they do/run/change?
-
-
12th September 2018, 12:23 PM
#194
Patrol God
Originally Posted by
Throbbinhood
Think I'm going to do away with the airbox completely and move to a patroldocta style one or similar. Have heard most people block off the vac lines from carby to airbox with no ill effects, anyone know what they do/run/change?
Dom has posted the vacuum circuit earlier in this thread.
My advice is: not to follow my advice.
-
-
14th September 2018, 02:19 PM
#195
@dom14 you still around here mate?
-
-
22nd January 2019, 01:38 PM
#196
Patrol God
Ok, all you Dirty thirty owners. Time to check and re-torque the crankshaft pulley bolt!! 152 nm or 112-113 ftlb.
Take off the stone guard. Unclip the radiator shroud extension piece and it is easily accessible.
-
-
24th May 2019, 10:02 PM
#197
Patrol God
-
-
6th June 2019, 02:05 PM
#198
Anyone have an aftermarket Airbox in their rb30? What do you do with the vac lines that feed into the stock one? Plug them? What do they all do?
-
-
12th June 2019, 12:02 PM
#199
bumpity bumpity bumpsalot
-
-
12th June 2019, 02:39 PM
#200
Patrol Guru
Originally Posted by
Throbbinhood
bumpity bumpity bumpsalot
Post #56 doesn't help?
-