-
10th July 2017, 07:34 AM
#231
Moderator
That sound deadening though!!! OMG! Slick Rossco.
Hey a 70mm foam Roller is your friend Next Time you paint the chassis. What prep did you do to the chassis and what paint?
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to MudRunnerTD For This Useful Post:
-
10th July 2017 07:34 AM
# ADS
Circuit advertisement
-
10th July 2017, 09:00 AM
#232
Legendary
[QUOTE=Rossco;733108]Yeah still not the one I remember, cheers anyway craig. Had a bit of a dig might have more of a look later. . .
Anyways finished painting chassis with brush, looks pretty smick.
A bit better cleaned out, should save a bit of weight. Put in some 15mm coil spacers all round too, so with the reduced body lift should be similar to what it was.
That just looks sexy as ..... unfortunately, it won't take long till it will never look this good again I reckon ....
GU PATROL 2011 Ti, with goodies...
-
The Following User Says Thank You to happygu For This Useful Post:
-
10th July 2017, 09:56 AM
#233
The 747
[QUOTE=happygu;733153]
Originally Posted by
Rossco
Yeah still not the one I remember, cheers anyway craig. Had a bit of a dig might have more of a look later. . .
Anyways finished painting chassis with brush, looks pretty smick.
A bit better cleaned out, should save a bit of weight. Put in some 15mm coil spacers all round too, so with the reduced body lift should be similar to what it was.
That just looks sexy as ..... unfortunately, it won't take long till it will never look this good again I reckon ....
Ahhh but you don't know our Rossco! He will be out there with a toothbrush giving it a good scrub after every trip.
-
The Following 2 Users Say Thank You to Winnie For This Useful Post:
Maxhead (10th July 2017), Rossco (10th July 2017)
-
10th July 2017, 01:28 PM
#234
Legendary
Originally Posted by
MudRunnerTD
That sound deadening though!!! OMG! Slick Rossco.
Hey a 70mm foam Roller is your friend Next Time you paint the chassis. What prep did you do to the chassis and what paint?
Yeah i know it's smick as.
Yeah roller's a good idea actually I'll definatly keep it in mind next time i paint the chassis. might make it a monthly routine. . .
Just Karchered it, wire brushed bad bits and used prep wash with a rag everywhere i could get to. Just used motospray chassis black from super dodgey . . . Should see the rear diff too OMG it's to die for . . Just need to do the front one, plan was to put in the diff brace while the body was off but ran out of time, that's next on the list. .
Sent from my GT-I9506 using Tapatalk
Last edited by Rossco; 10th July 2017 at 06:02 PM.
-
The Following 2 Users Say Thank You to Rossco For This Useful Post:
Family4x4 (8th May 2020), MudRunnerTD (10th July 2017)
-
10th July 2017, 04:31 PM
#235
SUCH IS LIFE
That's some impressive work there Rossco....very inspirational...pity I wouldn't have the patience to do something like this.
I thought wiring my little led bar was bad enough...lol
................on the road
________________________
______ 2017 D-Max _______
I don't have a short temper. I just have a quick reaction to bullshit
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to Maxhead For This Useful Post:
growler2058 (11th July 2017)
-
10th July 2017, 06:00 PM
#236
Legendary
Originally Posted by
Maxhead
That's some impressive work there Rossco....very inspirational...pity I wouldn't have the patience to do something like this.
I thought wiring my little led bar was bad enough...lol
................on the road
You'd be right Krisso, few glasses of moonshine and just tinker away. . .
Sent from my GT-I9506 using Tapatalk
-
The Following 4 Users Say Thank You to Rossco For This Useful Post:
GQtdauto (10th July 2017), Maxhead (10th July 2017), mudski (10th July 2017), Winnie (10th July 2017)
-
10th July 2017, 09:44 PM
#237
The master farter
What your sort matting have you used on the floor of the cab there Rossco?
-
-
10th July 2017, 09:53 PM
#238
Legendary
Originally Posted by
mudski
What your sort matting have you used on the floor of the cab there Rossco?
Ping Jing, seems pretty good, is cheaper than dynamat and a bit thicker i think. Pulled the factory stuff out of the firewall if the old one, is a little ratty in bits but think it's salvageable. . .
Sent from my GT-I9506 using Tapatalk
-
The Following User Says Thank You to Rossco For This Useful Post:
-
10th July 2017, 11:00 PM
#239
Patrol Guru
Hahaha monthly painting of the chassis 😝 , I'm about to strip my 'BIG' truck seats & floor out & line it all with dynamat but I'd heard of PingJing & now I've seen you've used it I might give it a go .
-
The Following User Says Thank You to Sprock For This Useful Post:
-
12th July 2017, 02:17 PM
#240
Legendary
-
The Following 5 Users Say Thank You to Rossco For This Useful Post:
Avo (19th July 2017), Bacho86 (12th July 2017), GQtdauto (12th July 2017), growler2058 (13th July 2017), mudski (12th July 2017)