-
7th May 2017, 06:44 PM
#1
Patrol God
Evening ppl
Can any body tell me what size bolt I need for
for the engine mount brackets are they fine
thread or course thanks in advance
its a 3l Di
-
-
7th May 2017 06:44 PM
# ADS
Circuit advertisement
-
7th May 2017, 10:25 PM
#2
SUCH IS LIFE
I wonder if they have the size in the service manual Roofy?
................on the road
________________________
______ 2017 D-Max _______
I don't have a short temper. I just have a quick reaction to bullshit
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to Maxhead For This Useful Post:
-
8th May 2017, 07:33 AM
#3
Patrol God
Originally Posted by
Nisshead
I wonder if they have the size in the service manual Roofy?
................on the road
Looked in the gregorys manual just says for bolts
might be 9/16 ill know better once I get it apart
-
-
8th May 2017, 08:22 AM
#4
SUCH IS LIFE
Originally Posted by
Sir Roofy
Looked in the gregorys manual just says for bolts
might be 9/16 ill know better once I get it apart
I just checked the normal manual and they seem to have torque specs but not bolt sizes.
Bloody hard manuals to navigate..lol
................on the road
________________________
______ 2017 D-Max _______
I don't have a short temper. I just have a quick reaction to bullshit
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
8th May 2017, 09:16 AM
#5
Patrol God
I'm sure mudski has some new mounts ... He can check bolt sizes , measure up etc ... Maybe ? @mudski
Sent from my SM-G920I using Tapatalk
-
The Following User Says Thank You to Hodge For This Useful Post:
-
8th May 2017, 09:39 AM
#6
Patrol God
Originally Posted by
Nisshead
I just checked the normal manual and they seem to have torque specs but not bolt sizes.
Bloody hard manuals to navigate..lol
................on the road
Not wrong there we will survive mate
-
-
8th May 2017, 09:40 AM
#7
Patrol God
Originally Posted by
Hodge
I'm sure mudski has some new mounts ... He can check bolt sizes , measure up etc ... Maybe ? @
mudski
Sent from my SM-G920I using Tapatalk
Thanks mate have to wait till he's free I guess
-
-
8th May 2017, 09:56 AM
#8
The master farter
The mounts don't use bolts, they have studs in them. The bracket is bolted to the chassis. I just check the parts catalog and theres no size written. They will be a metric fine thread. Are all the bolts missing? both sides? I think they are a 14mm head on the bolt, which should be a 12mm (1.5 pitch I think) by maybe 20mm in length. If you can get another out you can use this for reference.
11298VB912 for LHS and 11298VB913 for RHS, are the OEM numbers. 4 each you need for both sides. Not sure why they are different part numbers, most times I see this they are the same part, just different numbers. See if a local Nissan dealer ship can get them? They might be cheap enough from them for the right ones.
-
-
8th May 2017, 12:01 PM
#9
Patrol God
Thanks mate yea four bracket ones where missing the ones that bolt to the motor
was very lucky the motor didn't twist out
-
-
8th May 2017, 06:09 PM
#10
Patrol God
ITS done now I have to wash the blood off the motor and me
hate 3l motors with a vengeance
shouldn't come loose this time used lock tight
-
The Following 5 Users Say Thank You to Sir Roofy For This Useful Post:
Bob (10th May 2017), Hodge (8th May 2017), MB (8th May 2017), mudnut (8th May 2017), Rossco (8th May 2017)