-
3rd May 2017, 09:11 AM
#41
Enjoying the trips
Last edited by macca; 3rd May 2017 at 09:32 AM.
Cheers
Macca
-
The Following User Says Thank You to macca For This Useful Post:
-
3rd May 2017 09:11 AM
# ADS
Circuit advertisement
-
3rd May 2017, 09:19 AM
#42
Enjoying the trips
Originally Posted by
jff45
@
macca, it might be wise to take some measurements if you're mounting the complete Chevy triangle to another. ADR says they can't be more than 250mm outside the widest part of the vehicle if not towing.
My driver's side is about 5mm over that.
Phew 220mm. That was from the box/pod body line.
Cheers
Macca
-
-
3rd May 2017, 09:45 AM
#43
Enjoying the trips
Cheers
Macca
-
-
3rd May 2017, 09:46 AM
#44
Patrol Freak
The wagon doesn't have that advantage..
John
2001 GUII TI 4500 - Now converted to TD42T auto with Nomad valve body
-
-
3rd May 2017, 10:32 AM
#45
Patrol Guru
Does Clearview supply the correct brackets to mount to the GU if you buy their expensive mirrors or do you have to get that fabricated yourself?
2004 4.2TDi GU ST Ute, 3" Exhaust, UHF, Lightforce Spotties, BFG All Terrains, Steel Winchbar, Winch, Dual Batts, CC Ultimate IC, 4" Snorkel, XLR8 Steps and Scrub bar
-
-
3rd May 2017, 12:32 PM
#46
Patrol Freak
Originally Posted by
gubigfish
Does Clearview supply the correct brackets to mount to the GU if you buy their expensive mirrors or do you have to get that fabricated yourself?
Yes, you can buy the Clearview mirrors for GU but they don't have the blinkers because there's no factory wiring for them.
John
2001 GUII TI 4500 - Now converted to TD42T auto with Nomad valve body
-
-
3rd May 2017, 12:36 PM
#47
Enjoying the trips
Originally Posted by
gubigfish
Does Clearview supply the correct brackets to mount to the GU if you buy their expensive mirrors or do you have to get that fabricated yourself?
@gubigfish
My guess is they would replace the OEM mirror simply swapping one for the other and the wiring plug will match what's in the car too.
For the money that's what you would expect.
Cheers
Macca
-
-
3rd May 2017, 02:37 PM
#48
Legendary
Yes , Clearview are model specific and are just a simple bolt in and plug in job .
Checked my distance for the mirror and I'm under the 250 mm , GQ sticks out about in the rear side above the back wheel and if you take the flares as the widest part of the car I'm under easy .
-
-
3rd May 2017, 02:37 PM
#49
Legendary
Originally Posted by
macca
When are you going to paint it ?
-
-
3rd May 2017, 03:01 PM
#50
Enjoying the trips
Originally Posted by
GQtdauto
When are you going to paint it ?
It was hanging up to dry mate.
Coat of cold gal grey and black the bits that are seen.
Its all on and usable now, have a 400klm drive this weekend so be interesting to see if I can see.
Cheers
Macca
-