Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Hi All.
I know these are most often on a TD42 motor - but has anyone been able to install a Fatz Box on ZD30 CRD? I know this would mean some way to deal with the MAF ...
I'm just curious. Fat are saying is doable. But it's a chunk of money so I don't want to discover after it arrives that it won't fit and won't work...
I have a stock Nissan Snorkle. Fatz are saying that's fine - I would just need to cut out the hole in the guard to 4".
Thoughts? I you have managed it on a ZD30 - how is it?
Ta!
2015 GU ST 3.0CRD Auto Wagon, 2" EFS Lift, 5 x Procomp 16s with MT ATZ P3s, TJM Outback Bar and 12000lb Winch, 80l Sub Tank, Redarc 40A DC-DC with Optima Battery and 180w Solar, ARB Compressor On-board, 3" EXHAUST, Rhino Pioneer Platform and Darche Awning, DIY Drawers to come!
It can be done.
Simply cut the square flange off the front of the maf housing and place a bit of silicone tube between the air box and maf housing..
Not recommended though for Di as the maf sensor is pretty critical and the inline filters / mesh screens soften the air over the maf.
Crd doesn't seem to be as touchy but you may get some limp issues with maf voltages spiking under hard acceleration..
Nothing a remap can't fix though..
What the hell is that mate? Sounds dirty....
;-)
Also - what did you end up with Threedogs? I know you did a lot of investigation. What has been your results? Any improvement in economy?
Ta!
Originally Posted by threedogs
just a thought when I was upgrading my air intake, was to
incorperate a "hump" silicon hose into the system just saying
2015 GU ST 3.0CRD Auto Wagon, 2" EFS Lift, 5 x Procomp 16s with MT ATZ P3s, TJM Outback Bar and 12000lb Winch, 80l Sub Tank, Redarc 40A DC-DC with Optima Battery and 180w Solar, ARB Compressor On-board, 3" EXHAUST, Rhino Pioneer Platform and Darche Awning, DIY Drawers to come!
What the hell is that mate? Sounds dirty....
;-)
Also - what did you end up with Threedogs? I know you did a lot of investigation. What has been your results? Any improvement in economy?
Ta!
Havent been well enough to fit it, I have a spare MAF here I'd like taken out a bit.
But one from an Opel fits just check ebay cheaper than say HPD doing the same thing,
You'll see those silicone hoses with a hump on them, suppose its for surges etc
just type in silicone hump hoses on Ebay,,,puter playing up for link