-
24th October 2016, 01:11 AM
#1
Last edited by MQ PATROL; 16th November 2016 at 12:02 AM.
-
The Following User Says Thank You to MQ PATROL For This Useful Post:
mudnut (24th October 2016)
-
24th October 2016 01:11 AM
# ADS
Circuit advertisement
-
24th October 2016, 11:15 AM
#2
Patrol God
This guy from France did a complete rebuild from the chassis up and posted a heap of pictures as he did it.
http://www.nissanpatrol.com.au/forum...novation/page6
I am having difficulty accessing the photo though.
My advice is: not to follow my advice.
-
-
24th October 2016, 12:41 PM
#3
Patrol God
He lifted the body from the chassis then completely cleaned and cut the rust out of it. After welding in patches, he used a really good paint for the chassis.
The body work was done carefully and the resulting paint job was almost show quality.
Still can't get the pics to work though.
My advice is: not to follow my advice.
-
-
24th October 2016, 02:25 PM
#4
Patrol Freak
I lifted the cab off The Pig with a forklift. Looks like you have one with fork slippers just pad said slippers and easy peasy. Reckon you'll lose the screen tho'.
Best to remove all the glass you can!
I AM NOT STUBBORN.........I prefer the term, Singlemindedly independent !
-
-
24th October 2016, 02:37 PM
#5
Yeh ok .... so just through windows with padded forks?..... mmmm tryna keep costs as low as can!!
-
-
24th October 2016, 02:55 PM
#6
Patrol Freak
Ok, so forklift in photos not yours? Endless chain and overhead gantry?
I AM NOT STUBBORN.........I prefer the term, Singlemindedly independent !
-
-
24th October 2016, 03:50 PM
#7
Patrol God
I think it's better to Jack it up from the ground?
>>>tappin from tassie
Hello from Under Down Under!
-
-
24th October 2016, 03:56 PM
#8
Patrol Freak
I guess there's lotsa ways I just went with what I had to hand and my natural inclination toward laziness!
I AM NOT STUBBORN.........I prefer the term, Singlemindedly independent !
-