What did you do to your Patrol today!

[Touses]

@mudski been meaning to ask, what happened to your sig, the NADS stuff etc?

[Throbbinhood]

Meant to post this on Saturday night, thought I did but didn't hit send.

Took it to Toolangi, got it muddy, let her bounce on limiter like a good rb30 should! Then gave her a nice wash on the way home and put her away for a bit of TLC before the next trip. Oh and put a rock through a tyre, hopefully it can be plugged.

[garett]

Hows this. I get a message on my eBay store. Some wanting me to get them an ash tray and centre console lid. I priced them up and gave the lead time, he said not to worry as he got them made using a 3d printer. Crazy!

Sent from my GT-N7105T using Tapatalk

no printer here good old fashioned ply and ali and later might even cover it with some material....or just go for that industrial look.

[BigRAWesty]

Had an ok win today..
Cat is in.
High temp paint on and wrapped..

Tomorrow hopefully get a good start on the gauges..
Not sure if I'll buy a threaded barb or an intercooler adapter yet..
$30 is a fair hit..

On another issue I'm stuck on an oil point. Supposedly one above the starter motor but can't find it..
The one next to the oil filter is do able about has a heat shroud over it which is a pita..
Anyway. It'll happen..

[mudski]

Blew the rear diff this morning. Cracked the housing open...Right in the middle of a main intersection. On a long weekend too.
Yay!

Sent from my GT-N7105T using Tapatalk

[Touses]

Blew the rear diff this morning. Cracked the housing open...Right in the middle of a main intersection. On a long weekend too.
Yay!

Sent from my GT-N7105T using Tapatalk

What the hell were you doing to crack the bloody housing?

[MB]

Blew the rear diff this morning. Cracked the housing open...Right in the middle of a main intersection. On a long weekend too. Yay! Sent from my GT-N7105T using Tapatalk

You so funny Mr Mudski, no way !!

[mudski]

What the hell were you doing to crack the bloody housing?

Going slow. Just got into second going across an intersection and it went bang and the back wheels locked up.
Managed to get across and took a look and oil everywhere. Split the housing.
I reckon the pinion bearing let got and the pinion gear shifted and jammed against the housing.
Managed to get a centre already and delivered to me.
Nice and cold. Fun weekend ahead.

You so funny Mr Mudski, no way !!

Not so funny mate. There goes my funds towards the 4inch intake i was saving for.

Sent from my GT-N7105T using Tapatalk

[MB]

Bloody hell, no good mate, sorry to hear, honestly thought you were stirring up Westy.

[Touses]

So the bearing let go without warning? Find it hard to believe there wasn't some sort of signal. Bearings on their way out growl n squeal n carry on.

Not being cynical here, trying to understand the sit'. Storing up other folks experiences like scrat on an acorn.