-
26th April 2016, 10:50 AM
#91
The master farter
Originally Posted by
threedogs
Wheres the respect,,,,,,,,, kicking a Patrol well I never. lol
Will you be fitting stronger CV's or not required with your style of driving???
Kicking a Patrol lol
I just going with NTN CV's John. The same that came out. Anything stronger is over double in price and I dont have the coin for that.
-
-
26th April 2016 10:50 AM
# ADS
Circuit advertisement
-
26th April 2016, 01:32 PM
#92
Patrol God
Originally Posted by
mudski
I just going with NTN CV's John. The same that came out. Anything stronger is over double in price and I dont have the coin for that.
I think the stronger ones are more suited to running 37" and up Boggers of yore lol
and very high HP, sadly those days are gone withe 33" limit
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
26th April 2016, 06:46 PM
#93
Patrol God
Not real loose body mounts is it. I was convinced there was something very wrong with the suspension and even replaced the radius arm bushes. When it rained the noise got worse so I whacked some home made rubber washers in the mounts and the noise has gone.
Last edited by mudnut; 26th April 2016 at 07:29 PM.
My advice is: not to follow my advice.
-
-
26th April 2016, 07:26 PM
#94
The master farter
Originally Posted by
mudnut
Not real loose body mounts is it. I was convinced there was something very wrong with the suspension and even replaced the radius arm bushes. When it rained the noise got worse so I whacked some home made rubber washers in mounts and the noise has gone.
Nah been over them three times with the torque wrench Craig. The third time they haven't moved....
Sent from my SM-P600 using Tapatalk
-
-
26th April 2016, 07:34 PM
#95
Patrol God
Yeah the bolts were tight but the rubbers were compressed and hard.
My advice is: not to follow my advice.
-
-
26th April 2016, 07:36 PM
#96
The master farter
Originally Posted by
mudnut
Yeah the bolts were tight but the rubbers were compressed and hard.
New mounts only a month or a bit ago....
Sent from my SM-P600 using Tapatalk
-
The Following User Says Thank You to mudski For This Useful Post:
-
2nd May 2016, 03:58 PM
#97
The master farter
Ok. New CV is in. All went well on that part. CV was quite notchy so thats done.
The knocking is still there though.
I got Jonathan to climb under while i kick the front of the rh wheel.
Seems to be coming from where the drop box is. All the bolts in that area are tight.
When i climbed under and had the wife kicking the wheel, if i put my hand on the floor and applied some pressure, not alot, the noise would go away. Se as if i push on the side step.
So i might have to remove the carpet and check the floor for cracks or anything out of the ordinary. Plus ill remove the drop box and inspect it and the mounting area.
Bloody strange this is. I have to crawl over a speed hump so it wont make the noise. Lhs is fine. No noise.
Getting there. Lol.
Sent from my GT-N7105T using Tapatalk
-
-
3rd May 2016, 09:26 PM
#98
Expert
Originally Posted by
mudski
Ok. New CV is in. All went well on that part. CV was quite notchy so thats done.
The knocking is still there though.
I got Jonathan to climb under while i kick the front of the rh wheel.
Seems to be coming from where the drop box is. All the bolts in that area are tight.
When i climbed under and had the wife kicking the wheel, if i put my hand on the floor and applied some pressure, not alot, the noise would go away. Se as if i push on the side step.
So i might have to remove the carpet and check the floor for cracks or anything out of the ordinary. Plus ill remove the drop box and inspect it and the mounting area.
Bloody strange this is. I have to crawl over a speed hump so it wont make the noise. Lhs is fine. No noise.
Getting there. Lol.
Sent from my GT-N7105T using Tapatalk
Its sounding like what I had. I found that a noise was coming from the drop box. The clunk would not happen all the time.
Try banging under the drop box with your hand. I replaced the mushroom bushes and the noise was still there. I found that the front part of the drop box was flexing about two mil or so and hitting the chassis rail.
Hope that helps and makes sense
-
-
3rd May 2016, 09:37 PM
#99
Originally Posted by
oddkid82
Its sounding like what I had. I found that a noise was coming from the drop box. The clunk would not happen all the time.
Try banging under the drop box with your hand. I replaced the mushroom bushes and the noise was still there. I found that the front part of the drop box was flexing about two mil or so and hitting the chassis rail.
Hope that helps and makes sense
This is what i said was happening mark.
-
-
3rd May 2016, 09:50 PM
#100
The master farter
Originally Posted by
oddkid82
Its sounding like what I had. I found that a noise was coming from the drop box. The clunk would not happen all the time.
Try banging under the drop box with your hand. I replaced the mushroom bushes and the noise was still there. I found that the front part of the drop box was flexing about two mil or so and hitting the chassis rail.
Hope that helps and makes sense
Does make sense. So how'd you fix it. I really cbf'ed climbing under right now, and even thought to grab the welder out. lol. But then I'd have to get under...
-