-
18th January 2016, 08:41 PM
#1
Beginner
Indicators stopped working
Hi All. My indicators have stopped working. Have checked the fuses like everyone said but they are all fine. Even the hazard one. Could it be the relay and how easy is it to replace this?
-
-
18th January 2016 08:41 PM
# ADS
Circuit advertisement
-
18th January 2016, 09:29 PM
#2
The master farter
Yeah the indicator relay is found under the rhs of the dash. Its blue in colour and you can simply use another one of the blue relays there to test it out.
Sent from my SM-P600 using Tapatalk
-
-
18th January 2016, 10:40 PM
#3
I am he, fear me
Originally Posted by
mudski
Yeah the indicator relay is found under the rhs of the dash. Its blue in colour and you can simply use another one of the blue relays there to test it out.
Sent from my SM-P600 using Tapatalk
You sure about that?
Mine is behind the centre dash and it should only have 3 pins "B", "L", and "E"
Dolphins are so smart that within a few weeks of captivity, they can train people to stand on the very edge of the pool and throw them fish.
-
-
18th January 2016, 11:37 PM
#4
If your hazard lights are still working then it can't be a faulty flasher relay.
The flasher relay is located below the radio on the RHS. Inline with your left knee when sitting in the drivers seat. If you look up from the clutch pedal towards the back of the radio you will see the black rectangle box with 3 wires going to it.
-
-
19th January 2016, 12:36 AM
#5
Check the wiring on the hazard light switch, if it is disconnected the indicators won't work
2012 CRD:
DIYs;
RedArc Dual battery
Hifonics audio amp
Reverse camera
-