-
25th August 2015, 04:22 PM
#1
Catchcan hose
HI everyone just got a new provent catch can but nothing else came with it now the pipe coming from the tappet cover dose it go to the top or bottom of the provent can any help please,
-
-
25th August 2015 04:22 PM
# ADS
Circuit advertisement
-
25th August 2015, 04:30 PM
#2
Patrol God
Go grab a heater hose off an XA falcon they are flared each end.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following User Says Thank You to threedogs For This Useful Post:
-
25th August 2015, 05:27 PM
#3
Patrol Guru
-
-
25th August 2015, 06:03 PM
#4
Patrol God
I dont use a pro-vent but does it have arrows on it at all,
I would guess it goes to the top and the bottom goes to the air intake.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
25th August 2015, 06:30 PM
#5
Patrol God
Originally Posted by
threedogs
Go grab a heater hose off an XA falcon they are flared each end.
I have gone this way on my 3L and do not recommend it.
After about a year of this hose being fitted it literally began sweating oil through the hose wall and dripping out all over the block. What is worse, hose is deteriorating away from the inside and bits of rubber got caught in the catch can filter. I have been told this is not a oil compatible hose form the beginning but took a punt anyway and yeah the end result is a ruined hose and bit of panic when it began leaking all over the driveway.
Yes it is a nice factory looking fit, but it is not the right hose.
-
The Following 3 Users Say Thank You to Hodge For This Useful Post:
growler2058 (25th August 2015), MudRunnerTD (29th August 2015), ova50 (25th August 2015)
-
25th August 2015, 06:36 PM
#6
Patrol Guru
Originally Posted by
ova50
Seems to be a problem with the link.
In eBay look for: 25mm - 16mm (1.00" - 0.63") Straight Silicone Reducer Hose Black AeroFlow
Last edited by ova50; 25th August 2015 at 06:40 PM.
Was a CRD
-
-
25th August 2015, 06:45 PM
#7
Patrol God
Here is the falcon hose. See a very neat finish and fit. But shame it's just not the right one.
-
-
25th August 2015, 06:47 PM
#8
Patrol God
Here is my catch an with the ugly reducers.
-
The Following User Says Thank You to Hodge For This Useful Post:
growler2058 (25th August 2015)
-
25th August 2015, 06:56 PM
#9
-
-
26th August 2015, 09:48 AM
#10
-