-
18th July 2015, 12:46 PM
#111
Patrol God
Originally Posted by
NissanGQ4.2
Is there such a thing these days Matt as a decent bolt shop?
Good question. They are few and far between. I find the biggest issue is getting the bloke behind the counter to put some effort in if they dont have what you ask for.
-
The Following User Says Thank You to nissannewby For This Useful Post:
NissanGQ4.2 (18th July 2015)
-
18th July 2015 12:46 PM
# ADS
Circuit advertisement
-
20th July 2015, 07:51 PM
#112
Apprentices Rule!!!
Originally Posted by
nissannewby
Good question. They are few and far between. I find the biggest issue is getting the bloke behind the counter to put some effort in if they dont have what you ask for.
Come to toowoomba and go to porters. Only decent one anywhere.
-
-
14th August 2015, 03:12 PM
#113
The 747
FINALLY got the winch back from welding! They did a good job and was cheap in the end but would have liked it sooner anyway...
So I can get around to cleaning it up and ready for painting next week now.
-
-
14th August 2015, 03:30 PM
#114
You know the rules Winnie
-
-
14th August 2015, 03:47 PM
#115
The 747
Originally Posted by
Bloodyaussie
You know the rules Winnie
I should have known better...
-
The Following 3 Users Say Thank You to Winnie For This Useful Post:
Bloodyaussie (14th August 2015), MudRunnerTD (14th August 2015), threedogs (14th August 2015)
-
14th August 2015, 08:02 PM
#116
Administrator
Originally Posted by
Winnie
I should have known better...
lots of clearance for the all thread and bolts, nice!
How close was your winch to the grille on your millweld pre brace kit plates?
Still enough room with out chopping?
-
-
14th August 2015, 08:45 PM
#117
The 747
I honestly did not look Andy, I've still got the Ironman winch on my bar.
-
-
14th August 2015, 08:52 PM
#118
Administrator
Originally Posted by
Winnie
I honestly did not look Andy, I've still got the Ironman winch on my bar.
sorry to create paranoia...lol
Should be fine mate it's just the top brace on mine was only 8mm from my ic which sits 30mm past the grille and as you saw my grille has been cut to suit.
Can't remember exact measurements but your millweld had a fair bit extra clearance then ARB so fingers crossed!
-
-
14th August 2015, 08:57 PM
#119
The 747
Yeah look I've really only added another 10-15mm to the overall depth of the winch. Worst case is we will just do a snippy snip but hopefully we won't need to =]
-
The Following User Says Thank You to Winnie For This Useful Post:
-
14th August 2015, 11:14 PM
#120
The master farter
Hey winnie. Whats the model of your winch? I bumped into a bloke today, we were just gas bagging about 4wds and the conversion got onto winches and he said he's got a 8274? Hi mount. he said he would sell me cheap as it needs a rebuild. We haven't talked price or i havent even seen it. I know zero about them. Not really the best time to be spending more money too. My bar cant even take a hi mount, i got his number though...
Cheers.
Sent from my SM-P600 using Tapatalk
-