10th March 2015, 09:28 AM
#1
Patrol God
Air box mods
see a few are trying to increase air flow from the air box, after doing a bit
of research I've come across this piece which will come out the top of the air box lid,
and should allow plenty of room from the bonnet
http://www.ebay.com.au/itm/P547694-A...-/271622178742
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
10th March 2015 09:28 AM
# ADS
Circuit advertisement
10th March 2015, 09:33 AM
#2
Patrol God
That looks very much like the plastic equivalent of the steel cobra head that PMC had fitted to his Patrol.
My advice is: not to follow my advice.
10th March 2015, 10:00 AM
#3
Patrol God
Sounds right and yes its called a Cobra head, I'm going to get a lid laser cut with a 3" hole in it
and then see how the build goes from there
BTW its rubber too
Last edited by threedogs; 10th March 2015 at 10:25 AM .
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
The Following User Says Thank You to threedogs For This Useful Post:
10th March 2015, 11:23 AM
#4
Patrol God
i have one of them on mine, cant say i notice a lot of difference but it all helps i suppose.
2003 gu3 td42tdi sold 😞 bloody gvm towing crap. Bt50 3500kg gvm.
The Following User Says Thank You to Stropp For This Useful Post:
threedogs (10th March 2015)
10th March 2015, 11:28 AM
#5
Patrol God
Originally Posted by
Stropp
i have one of them on mine, cant say i notice a lot of difference but it all helps i suppose.
Is the rest of the intake 3" rubber and/orstainless/ alloy bends etc
If anyone can find a link to this product Id be wrapt
Its a flanged 3" adaptor plate, not the best pic but you get the idea
Attached Images
Last edited by threedogs; 10th March 2015 at 03:24 PM .
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
10th March 2015, 03:55 PM
#6
Patrol God
getting a new lid cut from 316 stainless would you think 3/16 is thick enough,
it will be using the original clips to hold it in place
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
10th March 2015, 04:37 PM
#7
The master farter
Originally Posted by
threedogs
getting a new lid cut from 316 stainless would you think 3/16 is thick enough,
it will be using the original clips to hold it in place
What about the groove for the lid seal?
10th March 2015, 04:41 PM
#8
The master farter
Originally Posted by
threedogs
Is the rest of the intake 3" rubber and/orstainless/ alloy bends etc
If anyone can find a link to this product Id be wrapt
Its a flanged 3" adaptor plate, not the best pic but you get the idea
Hmm something like this John will do you nicely...
http://www.ebay.com.au/itm/POD-AIR-FILTER-ADAPTER-SUITS-NISSAN-200SX-MORE-/360486977734?pt=LH_DefaultDomain_15&hash=item53eeb 2c0c6
Now you need to make two of the stainless intake pipes....
The Following User Says Thank You to mudski For This Useful Post:
threedogs (10th March 2015)
10th March 2015, 05:18 PM
#9
Patrol God
Thanks but Ive skipped on that adaptor got the seal worked out just need to source the rubber ,Im sure Clarkes will have it or Rare spares
have most parts ordered, just need the lid cut.
http://www.ebay.com.au/itm/121490993...%3AMEBIDX%3AIT
This will push some air through lol
Last edited by threedogs; 10th March 2015 at 05:33 PM .
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
10th March 2015, 06:49 PM
#10
Patrol God
i also have the alloy airbox lid and 3" pipe to the turbo.
2003 gu3 td42tdi sold 😞 bloody gvm towing crap. Bt50 3500kg gvm.