Hi All
I have had this build in process for a few months now. It has taken a long long time to gain licensing pre-approval for this project but we are there now .
The rough outline is:
2008 GU coil cab chassis with 30,000Km starting point.
Extra Cab conversion
Duramax stage oneish (800hp) build by Socal and PID
Allison 6sp stage 5 (1000hp) build via PID
PTO & hydraulic system
Portal axles with all the fruit VIA Mark's Adaptors
Arctic front flares
Current status is
Stripped 95%
Axles are only just on their way to Mark's now we have approval
Engine waiting final stages of completion and dyno USA
Transmission and most accessories are here
Trial fit of transmission and dummy engine (loaned by PID) underway
Here is what I started out with
IMG_0768.JPG
IMG_0739.JPG
Stripping
IMG_0892.JPG
IMG_0902.JPG
Cutting
IMG_0928.JPG
IMG_1034.JPG