-
16th April 2014, 07:52 AM
#1
Expert
Bearing slides for drawers
I found recently on the Gold Coast a company called Furniture Hardware Supplies who has a stock of bearing runners up to 700mm for sale very cheap.
They would be perfect for rear drawer systems and campers etc.
They will freight them to you too.
At just $4 a set I might get a few just in case...
Their number is 1300 856 347
3/486 Scottsdale drive, Varsity Lakes QLD
GQ Wagon 4.2 carb 4inch lift of the road resting
GU Rd28 Wagon 2 inch lift on the road now daily driver
D22 Navara ZD30- in rehab pending being moved on.
-
The Following User Says Thank You to 90mav For This Useful Post:
growler2058 (17th April 2014)
-
16th April 2014 07:52 AM
# ADS
Circuit advertisement
-
16th April 2014, 07:54 AM
#2
Moderator
Have you got a link to their store mate?
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
16th April 2014, 08:09 AM
#3
Patrol God
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
16th April 2014, 08:16 AM
#4
Patrol God
Struggling to find the suitable runners on their site
-
-
16th April 2014, 08:23 AM
#5
Patrol God
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
16th April 2014, 09:32 PM
#6
Expert
Not all their gear is online. You would have call the guy directly. His name is mark.
GQ Wagon 4.2 carb 4inch lift of the road resting
GU Rd28 Wagon 2 inch lift on the road now daily driver
D22 Navara ZD30- in rehab pending being moved on.
-
-
16th April 2014, 11:08 PM
#7
Legendary
Just a word to the wise .... at 30 and 25 Kg rated, they are very light on for drawers in a vehicle pounding over corrugations and bumps all day. That would be the reason they are cheaper.
Try and see if they have some heavier duty slides and then compare prices. My drawer slides and fridge slides are between 100 & 120 Kg rated
GU PATROL 2011 Ti, with goodies...
-
The Following 2 Users Say Thank You to happygu For This Useful Post:
BigRAWesty (17th April 2014), growler2058 (17th April 2014)
-
17th April 2014, 08:50 AM
#8
Patrol God
Originally Posted by
happygu
Just a word to the wise .... at 30 and 25 Kg rated, they are very light on for drawers in a vehicle pounding over corrugations and bumps all day. That would be the reason they are cheaper.
Try and see if they have some heavier duty slides and then compare prices. My drawer slides and fridge slides are between 100 & 120 Kg rated
Bloody oath, woukd be fitting anything smaller than 100kg..
-
-
17th April 2014, 08:53 AM
#9
My small draw is rated for about 30kg but my big draw is rated for 130kg and those runners cost me $88 cost price as my mate is in the caravan industry.
-
-
17th April 2014, 09:45 AM
#10
Originally Posted by
Westy's Accessories
Bloody oath, woukd be fitting anything smaller than 100kg..
Agree!
These are the ones I used in my last set (100Kg rated). At the time, I bought them through Hettich. The good thing about them is they are "under mounted" and therefore carry the drawer nicely.
http://www.ebay.com.au/itm/900mm-100...item20ded4d0aa
I'm using the same in my current setup I'm building
-