-
26th June 2010, 07:47 PM
#1
Administrator
Welding & Changing Tyres off Rims - Bush Mechanic Style.
-
The Following 5 Users Say Thank You to AB For This Useful Post:
healy (18th December 2012), mudnut (18th May 2015), Rustyboner81 (23rd August 2012), Sherro (4th May 2014), wheels (8th December 2011)
-
26th June 2010 07:47 PM
# ADS
Circuit advertisement
-
18th December 2012, 06:31 PM
#2
Well done Gents, great Vid
-
-
6th May 2013, 12:17 PM
#3
its the Blair Witch project style tyre removal video
-
-
6th May 2013, 01:02 PM
#4
Daily Lurker
wouldnt welding like that damage your battery?
-
-
6th May 2013, 01:09 PM
#5
Patrol God
Originally Posted by
rusty_nail
wouldnt welding like that damage your battery?
Yes it may but if you break a spring, or radius arm.. I'm willing to f a battery to get my patrol out..
Kallen Westbrook
Owner of
Westy's Accessories
-
-
6th May 2013, 01:14 PM
#6
Daily Lurker
Originally Posted by
Westy's Accessories
Yes it may but if you break a spring, or radius arm.. I'm willing to f a battery to get my patrol out..
Kallen Westbrook
Owner of
Westy's Accessories
true, i spose a 200$ battery is cheaper than a 2000$ tow job.
-
The Following 2 Users Say Thank You to rusty_nail For This Useful Post:
BigRAWesty (6th May 2013), Robo (2nd February 2014)
-
6th May 2013, 06:09 PM
#7
Patrol God
Originally Posted by
rusty_nail
true, i spose a 200$ battery is cheaper than a 2000$ tow job.
That's my logic.
Also when welding a spring over lap/ layer it by about 30mm. And only weld along the sides.
This gives a far stronger joint, and still maintains original height..
ONLY IN EMERGENCY SITUATIONS!!!!
Kallen Westbrook
Owner of
Westy's Accessories
-
The Following 2 Users Say Thank You to BigRAWesty For This Useful Post:
rusty_nail (6th May 2013), Sherro (4th May 2014)
-
25th August 2013, 12:47 AM
#8
just need to remember to pack some welding rods..
-
-
25th August 2013, 09:26 AM
#9
Guys it does not damage batteries, but you must use batteries that are in good condition and fully charged
I have welded springs, a caravan draw bar and even a cracked diff ,we tried running 36 volt but found it had way to much amperage and started to blow holes even in 6mm plate.
-
-
20th January 2014, 09:33 PM
#10
Originally Posted by
MickSib
Is the video link still active, would be nice to view it
Yes????????????????????????????????
-