Gu recover points

[Mike02Ti]

Out of interest here please good folks, I’ve got Zinc Coated Metric Property Class 8.8 bolts on my aftermarket GU bullbar currently. Is that ok for bars and recovery points? Was warned away from Stainless Steel due to its sheer loading failure possibilities? https://www.hi-tensilebolt.com.au/bo...head-markings/


Sent from my iPhone using Tapatalk

As long as its a grade 8 bolt and above i dont see an issue with it. Which is what you have bought.
Going back to rigging we could not use anything less than grade 8 or above to lift / pull . Very similar characteristics for what we do in recoveries.
And your correct in staying away from stainless. Dont do it. Also dissimilar metal factors come in to screwing it in to a steel chassis.


Sent from my SM-G920I using Tapatalk