Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
hand held gen bracket and gen solenoid in approx position.
This is a broken one I replaced with a aftermarket one.
Also in approx same location.
Cheers
Thanks Robo, the actuators that I have look nothing like that and when mounted internally in the door they conflict with the window mechanism.
What brand did you end up getting? I may have to shop around by the looks of it as I now have central locking for the front 2 doors but still have to do the rear manually which isn't a problem until you have ballance a child in your arms.
Thanks Robo, the actuators that I have look nothing like that and when mounted internally in the door they conflict with the window mechanism.
What brand did you end up getting? I may have to shop around by the looks of it as I now have central locking for the front 2 doors but still have to do the rear manually which isn't a problem until you have ballance a child in your arms.
Thanks for your help.
It's a good idea to post an intro in the introduction section, just so we know who we are taking with.
It would also be a good idea to start a new thread, with pictures of your mounting problem.
sorry no pics but if you look down the snipper hole i mounted it right down the bottom of the door facing up with the rod from the motor pushing and pulling on the snipper rod just above the lock
4 door kit.
2 door kit.
Individual parts also available.
Jaycar and JB's
This type of actuator is what I replaced the broken gen nissan 1 with.
Pic is stand alone kit for a car that doesn't have c/lock in the first place.
Can also be hooked to work with alarm systems.
Last edited by Robo; 4th April 2012 at 11:28 AM.
Reason: more info