-
20th March 2012, 08:52 PM
#1
Beginner
My GU Patrol ute
hey guys and girls here's my ute
3" ridepro suspension with heap of other gear to go along with it.
Running 35" Micky Thomson ATZ
roof console, upgraded to electric windows for personal comfort bit of a DIY.
up front iv had a mate cut up and brace the factory commercial bar to suit a WARN high mount,
iv modded the winch added the all favorable 6Hp warn motor, fill and drain holes on the gear box, braced the drum across the back to stop twisting, new seal kits and bearings, and 50m of 12mm dynamic rope.
Front and rear ARB air lockers running off dedicated compressor, whilst i was under there i got my hands on a set of 4.3 centre's and fitted them up as well
most resent addition is Marks 4wd adapters 43% reduction gears in the transfer case another DIY project that was getting to the pointy end of my knowledge and it was a good exercise just a hard job solo....
interior iv installed a pyro and boost gauge mounted on the A pillar, Recaro expert L drivers seat for ergonomics, in cab winch controls, UHF, el cheapo ebay navigation system runs oz explorer and igo for street nav.
more stuff im sure just a quick wrap.
ill try upload some pics
Birdsvile track
nice one in the desert the boss took
Pic of the high mount setup
In the run stuff haha
SA Coast line
Vic high country
gauge setup
hope you guys like the truck thanks
Brendan
Last edited by greeny_gu_ute; 20th February 2013 at 07:15 PM.
Reason: photos had been moved
GU 4.2 ute, 3" lift, 3" exhaust, 35" ATZ's, F&R Lockers, 43% reduction gears, Custom factory bar with High mount tucked in along with the usual lights and UHF
[SIGPIC][/SIGPIC]
-
The Following User Says Thank You to greeny_gu_ute For This Useful Post:
DX grunt (21st March 2012)
-
20th March 2012 08:52 PM
# ADS
Circuit advertisement
-
20th March 2012, 08:59 PM
#2
Banned
Ohhhhhhh ... no photos attached old mate???? Or is it just my machine?????
-
-
20th March 2012, 09:06 PM
#3
Beginner
just working it all out still bloke haha just got it sorted
GU 4.2 ute, 3" lift, 3" exhaust, 35" ATZ's, F&R Lockers, 43% reduction gears, Custom factory bar with High mount tucked in along with the usual lights and UHF
[SIGPIC][/SIGPIC]
-
-
20th March 2012, 09:53 PM
#4
Patrol God
Nice ute mate I love my utes have 2 of them currently and the mrs has one too Good colour also
-
-
20th March 2012, 10:18 PM
#5
Banned
Originally Posted by
greeny_gu_ute
just working it all out still bloke haha just got it sorted
Haha ... the pictures were worth the wait mate!!! Top snaps and top looking rig!!!!
-
-
20th March 2012, 10:22 PM
#6
Administrator
Love the set up mate and top photos!
Some familiar photos there too...
-
-
21st March 2012, 04:25 AM
#7
Awesome looking rig mate love the photos
-
-
21st March 2012, 05:06 AM
#8
Love the pics, gotta see some of that country. Nice wheels too. Onya mate.
Are you ready for Christmas?
-
-
23rd March 2012, 03:58 AM
#9
Beginner
Nice Ute mate. love how you fit the high mount in there its tidy
2005 GU DX Patrol Ute TD42 coil/leaf. Front ARB Air locker-33" MTZ's-Warn winch-IPF900 HID's-Bigmouth bonnet scoop-2" Dobinson lift-3" Zorst-Boost + EGT gauges-Tuned to 13PSI-Custom steel tray-Hard Hat diff cover-Full Millweld set up coming soon
-
-
2nd April 2012, 02:22 PM
#10
-
The Following User Says Thank You to Protius For This Useful Post: